nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   Benchmarking And Overclocking (http://www.nvnews.net/vbulletin/forumdisplay.php?f=24)
-   -   Geforce FX 5600 Ultra Help! (http://www.nvnews.net/vbulletin/showthread.php?t=18905)

MindTrickZ 10-01-03 01:01 PM

Geforce FX 5600 Ultra Help!
 
I just got myself a Geforce FX 5600 Ultra after my old GF4, was not doing too well!

I did a 3d Mark2001 test and only got 8700, whice i belive is very low for such a Card!

Can you guys tell me whats up with this, it really got me confussed.

My specs:

Windows XP
AMD Athlon(tm) XP 2600+
512MB RAM
GeForce FX 5600 Ultra 128 MB DDR, 800 mhz!
Dets: 44.23
DirectX 9b

Not overclocked!

ChrisRay 10-02-03 03:28 PM

Re: Geforce FX 5600 Ultra Help!
 
Quote:

Originally posted by MindTrickZ
I just got myself a Geforce FX 5600 Ultra after my old GF4, was not doing too well!

I did a 3d Mark2001 test and only got 8700, whice i belive is very low for such a Card!

Can you guys tell me whats up with this, it really got me confussed.

My specs:

Windows XP
AMD Athlon(tm) XP 2600+
512MB RAM
GeForce FX 5600 Ultra 128 MB DDR, 800 mhz!
Dets: 44.23
DirectX 9b

Not overclocked!


yes that is extrenely slow for that system. You should at least get 12k out of it.. Have you checked to see if AGP texturing is enabled? That sounds like its stuck IN PCI mode.

ragejg 10-02-03 03:38 PM

Re: Geforce FX 5600 Ultra Help!
 
Quote:

Originally posted by MindTrickZ
Not overclocked!
133/266 fsb + PC2100 ...

Don't expect much out of a 2600 under these circumstances...

Many a user has complained about this problem...

Drop your multi, raise your fsb, ond raise the clocks on that card a little...

MindTrickZ 10-03-03 05:09 AM

Re: Re: Geforce FX 5600 Ultra Help!
 
Quote:

Originally posted by ragejg
133/266 fsb + PC2100 ...

Don't expect much out of a 2600 under these circumstances...

Many a user has complained about this problem...

Drop your multi, raise your fsb, ond raise the clocks on that card a little...

Well I uninstalled my Nvidia 44.23 and installed 3D Blaster 44.03 and i instantly gained 2000 3D mark points, it as from 8000+ to 10000+,

But I'm having Hard time adjusting the FSB and the clocks from the bios Setup, is there another way to do it!

I've Downloaded CPuCool, but i requires Ntiowp.sys file and i searched everywhere but cant find it!


All times are GMT -5. The time now is 09:15 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.