Korean 2560x1440 with 55hz over HDMI (updatet)
I like the korean 2560x1440 ips monitors, and because of this, I added a third one to my setup for 3 screen twinview (with a 660ti).
Because the first 2 monitors already occupy the dvi ports on my card I buyed a monitor with hdmi 1.4a port as the third (there aren't many models with display port).
Under windows it is possible to use the full resolution of the screen with a custom mode of 2560x1440 pixels with 55hz like you can see in this youtube video: http://youtu.be/1oHNl4bMLBA?t=5m36s
This are the working settings under windows:
I translated this to the following modeline:
Modeline "2560x1440_55R" 221.1088 2560 2608 2640 2720 1440 1443 1448 1478 +hsync -vsync
But if i now select this mode (after disabling some (all?) EDID checks) all 3 of my screens turn black and the system doesn't respond any more.
Any ideas what else i should try?
|All times are GMT -5. The time now is 04:16 AM.|
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.