nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   General Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=27)
-   -   nForce and dual usb busses (http://www.nvnews.net/vbulletin/showthread.php?t=20542)

LinuxChris 11-04-03 01:05 AM

nForce and dual usb busses
 
I have a new machine with an ASUS A7N8X-VM motherboard.

This,had been, without a doubt the hardest Linux iinstall I have ever done.

Redhat 9.0

Anyway, I installed the nForce drivers, and got ethernet working, but USB has been a problem. I finally realised that only one bus had been set up by the nForce installer in /etc/modules.conf, an tried pluggin stuff into the usb ports on teh front of the box. Those work OK (printer and CF card reader anyway). I have no idea how to get the other bus working, however. This is my /etc/modules.conf:

alias usb-controller usb-ohci
alias usb-controller1 usb-ohci
alias sound-slot-0 i810_audio
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias eth0 nvnet
alias sound-slot-1 nvaudio
alias usb-interface usb-ohci
alias char-major-195 nvidia

On boot, the first USB bus loads fine, but the second one fails. Anyone have any ideas?

-Thanks, Chris

LinuxChris 11-04-03 01:27 AM

log messages...
 
Here's some more info. ON boot, the following shows up in:

/var/log/messages:
kernel: usb.c: registered new driver usbdevfs
kernel: usb.c: registered new driver hub
apmd[1735]: Charge: * * * (-1% unknown)
kernel: usb-ohci.c: USB OHCI at membase 0xdc849000, IRQ 11
ifup: done.
kernel: usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
network: Bringing up interface eth0: succeeded
kernel: usb.c: new USB bus registered, assigned bus number 1
sshd: succeeded
kernel: hub.c: USB hub found
kernel: hub.c: 3 ports detected
kernel: usb-ohci.c: USB OHCI at membase 0xdc84b000, IRQ 11
kernel: usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation)
kernel: usb-ohci.c: USB HC TakeOver failed!
kernel: Trying to vfree() nonexistent vm area (dc84b000)
kernel: c2097eb8 0000000b dc84b000 dc8467fc 00001000 dc8467fc dc847280 c2230000
kernel: 00000000 c01cd311 c2230000 dc8467fc c2230000 dc847280 00000001 dc842000
kernel: c01cd3ac dc847280 c2230000 ffffffea 00000001 00000001 dc845f3c dc847280
kernel: Call Trace: [<dc8467fc>] ohci_pci_ids [usb-ohci] 0x1c (0xc2097ec4))
kernel: [<dc8467fc>] ohci_pci_ids [usb-ohci] 0x1c (0xc2097ecc))
kernel: [<dc847280>] ohci_pci_driver [usb-ohci] 0x0 (0xc2097ed0))
kernel: [<c01cd311>] pci_announce_device [kernel] 0x35 (0xc2097edc))
kernel: [<dc8467fc>] ohci_pci_ids [usb-ohci] 0x1c (0xc2097ee4))
kernel: [<dc847280>] ohci_pci_driver [usb-ohci] 0x0 (0xc2097eec))
kernel: [<c01cd3ac>] pci_register_driver [kernel] 0x60 (0xc2097ef8))
kernel: [<dc847280>] ohci_pci_driver [usb-ohci] 0x0 (0xc2097efc))
kernel: [<dc845f3c>] ohci_hcd_init [usb-ohci] 0x30 (0xc2097f10))
kernel: [<dc847280>] ohci_pci_driver [usb-ohci] 0x0 (0xc2097f14))
kernel: [<c011c6e1>] sys_init_module [kernel] 0x4e5 (0xc2097f1c))
kernel: [<dc842060>] ohci_mem_init [usb-ohci] 0x0 (0xc2097f20))
kernel: [<c01093b3>] system_call [kernel] 0x33 (0xc2097fc0))
kernel:
kernel: usb.c: registered new driver hiddev
kernel: usb.c: registered new driver hid
kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
kernel: hid-core.c: USB HID support drivers



Maybe that helps


All times are GMT -5. The time now is 07:57 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.