5328 won't work with Fedora kernel 2.4.22-1.2149
I installed the nvidia driver 5328 in Fedora Core 1 and it just shows a blank screen.
I installed with:
(go to init 3)
On boot i just get a black screen, i can only press ctrl-alt-del to reboot,
or i can SSH from another system over the network to the affected machine.
I think at some point i did see an error of X crashing and giving me a 104 error.
The nvidia module gets loaded fine.
Asus A7V600 motherboard (KT600, although nvidia detects it as KT300)
Asus GeForce FX 5600 VideoSuide AGP 8x 128mb
Fedora Core 1
(attached is the XFree86 log that was generated)
i installed the 4620 driver which works fine.
Does /dev/apm_bios exist? Try adding "acpi=off" to the end of the grub boot line.
I did try with acpi=off but that had no effect.
Its strange, now that i'm booting with the older driver, i can see
that /dev/apm_bios is there.
Although when i was booting the new driver, in the log file i
can see this error:
(WW) Open APM failed (/dev/apm_bios) (No such device)
|All times are GMT -5. The time now is 03:55 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.