X crash with 5336 and kernel 2.6.3
Hi, I'm experiencing a problem where X crashes during nvidia initialization. I'm using gentoo with kernel 2.6.3 and nvidia kernel 5336.
My kernel is kompiled without agpgart, and without APIC up support. I have also tried disabeling acpi.
My graphics card is a Abit Siluro FX5200:
$ cat /proc/driver/nvidia/cards/0 (~)
Model: GeForce FX 5200
Video BIOS: 04.34.20.18.00
Card Type: AGP
My motherboard is a Abit NF7-S v2.0 nforce2 with an AMD XP 3000+.
Nvidia information from XFree86.0.log: (XFree86 Version 184.108.40.206 built under 2.6.3)
$ less XFree86.0.log|grep -i nvidia
(--) PCI:*(2:0:0) nVidia Corporation unknown chipset (0x0322) rev 161, Mem @ 0xe0000000/24, 0xd8000000/27
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
(II) NVIDIA XFree86 Driver 1.0-5336 Wed Jan 14 18:30:46 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(II) Found 1 PCI NVIDIA devices
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NvAGP" "0"
(**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
(**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT, TV"
(==) NVIDIA(0): Using HW cursor
(==) NVIDIA(0): Video key set to default value of 0x101fe
(**) NVIDIA(0): Use of AGP disabled per request
(**) NVIDIA(0): ConnectedMonitor string: "DFP"
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xE0000000
I'm also attaching my dmesg output showing some null pointer error.
I'd suggest making sure AGPART is compiled in. Whenever I tell XFree86 to use NvAGP it complains on boot that it can't find it and so falls back to AGPART.
One thing to keep in mind with Linux 2.6 AGPGART is that agpgart.ko lacks backend functionality, it relies on vendor specific backend modules (intel-agp.ko, nvidia-agp.ko, ...) to drive actual hardware. The
NVIDIA driver must assume that modprobe has been configured such that the appropriate backend module is loaded whenever agpgart.ko is requested.
I have tried with agpgart too. But I thought that it whould be more safe to try to get it running with agp disabled at first (Option "NvAGP" "0" in XF86Config).
I just enabled nvagp=3 with the 2.6.3 and my fps in UT2003 doubled over what Windows was doing, same settings, same point so any idea what that could be.
Sorry to highjack the thread.
I had exactly the same problem after upgrading from 2.6.2 to 2.6.3. The computer tries to load X, video attempts to initialize 4-5 times, then the screen goes completely blank - can't even get console. It's not frozen, though; I can still tell it to reboot.
Standard XFree 4.2 drivers ("nv") work, and the nvidia drivers still work with 2.4.25, which I'm using at the moment.
GF2MX-200 video, Asus A7N8X-X motherboard, running Debian Sarge, latest official video drivers, fast writes enabled.
|All times are GMT -5. The time now is 07:22 AM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.