Help on installing nForce Driver in RH Linux 9.0
System is a Athlon XP 2500 and kernel is 2.4.20-8 and tried both 1.0-0261 Kernel Tar File and Source RPM from here but got errors.
Attached are the tar and src rpm log files. Pls help, thx....
SRC RPM log file.
Ok here wat's I've done:
- install kernel by "rpm -ivh kernel-2.4.20-30.9.athlon.rpm"
- install nforce by "rpm -i NVIDIA_nforce-1.0-0261.rh90up_2.4.20_9.athlon.rpm"
- reboot the system
Can't find my nvnet alias with eth0, what should I do? Pls help!!!
Re: Help on installing nForce Driver in RH Linux 9.0
I had no trouble building the src.rpm and installing it for my basic A7N8X mobo running Fedora Core 1 test1 with linux kernel 2.4.22-1.2115.nptl. I installed the src.rpm in my home directory and built it as myself, then installed the resulting .rpm as root. I used the following ~/.rpmmacros file to install it in my home directory...
I also had the 'kernel-source' package installed before I started. The result
is found in /usr/src/linux-2.4... or you can 'rpm -qa |grep kernel-souce'.
Oh, the rpm should have added the alias to your /etc/modules.conf file. Check that file to make sure it is found then check these files or use
/etc/sysconfig/network (particularly the GATEWAY)
/etc/sysconfig/networking-scripts/ifcfg-eth0 (and eth1?)
Hope this helps.
|All times are GMT -5. The time now is 12:36 PM.|
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.