[multiple X screens] can't use the second one (no mouse!)
Hi, here is my config :
Geforce FX with VGA out, DVI out, and TV out.
Flat Digital Panel connected on the DVI out.
TV connected on the TV out (s-video).
I can set something up with "twinview", but my TV will be detected as primary monitor, so i had to trick it switching sync frequencies (TV freqs in monitor section, and LCD in device section).
It's quite OK, problem is some stuff will display on the TV (for instance, the log in screen at X startup), and i'm not supposed to have TV always ON.
So i decided to try the "multiple X screens" config.
I did it, and it seems OK, got my LCD in 1280x1024x24@75Hz, my TV in 1024x768x24@60Hz.
Problem is, how do i use the TV screen??? No mouse in there !!
Re: [multiple X screens] can't use the second one (no mouse!)
I had similar problem.
I had an X as mouse cursor on my tv (second display).
Fix for me was
before: first had 16bpp, tv had 15bpp
after: tv switched to 16bpp, so that both need same bpp or that tv needs 16bpp. mouse cursor appeared...
try to use only 800x600 with 16bpp on tv may be it fixes...
|All times are GMT -5. The time now is 08:11 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.