nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   General Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=27)
-   -   SuSE 9.1 & forcedeth - Fail (http://www.nvnews.net/vbulletin/showthread.php?t=29637)

syda 06-06-04 04:14 PM

SuSE 9.1 & forcedeth - Fail
 
I just installed a copy of SuSE 9.1, and for some reason in the boot I noticed that both eth0 and eth1 are failing to load. So basically I can't use SuSE 9.1 until I get the internet working. They are, however, Help would be much appreciated on this issue.

And as a warning, im not very familiar with the Linux distros, this is my first try at it... So I could be missing something extremely obvious.

whig 06-06-04 07:18 PM

Re: SuSE 9.1 & forcedeth - Fail
 
Run the YaST program to configure networking.

To do it by hand, start with this:
Code:

lspci -v | less
and look for Ethernet controllers.

Then do:
Code:

find /lib/modules/ | grep net
looking for matching kernel modules. The modprobe <modulename> command will initialise the network device (if it exists) and ifconfig will bring the interface up.

The Unix help system is in man pages, eg:
Code:

man ifconfig

syda 06-07-04 02:28 AM

Re: SuSE 9.1 & forcedeth - Fail
 
got it, thanks a lot - truly appreciate it.


All times are GMT -5. The time now is 06:39 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.