nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   General Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=27)
-   -   Problem with sound on 2.6.6 (http://www.nvnews.net/vbulletin/showthread.php?t=30495)

MillTek 06-22-04 07:25 PM

Problem with sound on 2.6.6
 
Hi,
I am a long (long) time MS user switching to Linux. (Very new)

I have an Abit NF7-M mobo with the NForce2 chipset. I just installed Debian Sarge 2.6.6 from debian.org. Seems everything is working except my sound. I had a look at the syslog record and this is what I see about the sound;


Jun 22 13:59:00 localhost kernel: Intel 810 + AC97 Audio, version 0.24, 14:18:06 May 12 2004
Jun 22 13:59:00 localhost kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
Jun 22 13:59:00 localhost kernel: i810: NVIDIA nForce Audio found at IO 0xdc00 and 0xd800, MEM 0x0000 and 0x0000, IRQ 20
Jun 22 13:59:00 localhost kernel: irq 20: nobody cared!
Jun 22 13:59:00 localhost kernel: Call Trace:
Jun 22 13:59:00 localhost kernel: [__report_bad_irq+49/115] __report_bad_irq+0x31/0x73
Jun 22 13:59:00 localhost kernel: [note_interrupt+76/111] note_interrupt+0x4c/0x6f
Jun 22 13:59:00 localhost kernel: [do_IRQ+146/249] do_IRQ+0x92/0xf9
Jun 22 13:59:00 localhost kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
Jun 22 13:59:00 localhost kernel: [default_idle+0/38] default_idle+0x0/0x26
Jun 22 13:59:00 localhost kernel: [default_idle+35/38] default_idle+0x23/0x26
Jun 22 13:59:00 localhost kernel: [cpu_idle+29/50] cpu_idle+0x1d/0x32
Jun 22 13:59:00 localhost kernel: [start_kernel+389/393] start_kernel+0x185/0x189
Jun 22 13:59:00 localhost kernel:
Jun 22 13:59:00 localhost kernel: handlers:
Jun 22 13:59:00 localhost kernel: [__crc_set_user_nice+1233541/6470000] (i810_interrupt+0x0/0x67 [i810_audio])
Jun 22 13:59:00 localhost kernel: Disabling IRQ #20
Jun 22 13:59:00 localhost kernel: i810_audio: Audio Controller supports 6 channels.
Jun 22 13:59:00 localhost kernel: i810_audio: Defaulting to base 2 channel mode.
Jun 22 13:59:00 localhost kernel: i810_audio: Resetting connection 0
Jun 22 13:59:00 localhost kernel: ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
Jun 22 13:59:00 localhost kernel: i810_audio: AC'97 codec 0, new EID value = 0x05c7
Jun 22 13:59:00 localhost kernel: i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Jun 22 13:59:00 localhost kernel: i810_audio: setting clocking to 48648


Sorry for the monster paste but I'd really like to get this fixed. I read while researching these forums that there are sufficient drivers in 2.6.6 to run the sound chip so I can't figure out why it won't work. Please explain any suggestions in detail. (I'm that new to Linux!)


Thanks,

Jim

geowiz 06-22-04 09:30 PM

Re: Problem with sound on 2.6.6
 
First reaction is that it is working..... it may be the audio level is muted. Use alsamixer or xmixer to set volume.

I don't think the irq 20 stuff has any bearing on your sound. (BTW, my mobo is NF7-S v1.1 )

MillTek 06-23-04 01:25 AM

Re: Problem with sound on 2.6.6
 
Hi Geowiz,
It's not working here's what I get when I install and try Alsamixer

alsamixer

alsamixer: function snd_ctl_open failed for default: No such device

Jim :|


All times are GMT -5. The time now is 04:10 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.