6106 nVidia Driver Doesn't Work But Stock nv Driver Does
I recently upgraded to the nVidia 6106 video driver from version 5336. There were no changes made to the xorg.conf file; however, now that I'm using the 6106 driver I get the following error message:
(EE) Screen(s) found, but none have a usable configuration
Fatal server error:
no screens found
If I edit the xorg.conf file and switch to the stock nv driver, then startx everything comes up without a problem.
The attached Xorg.0.log.txt file was renamed from Xorg.0.log so I could upload it.
I've attached a copy of my /etc/X11/xorg.conf file (attached as xorg.conf.txt). Line number 196 (the one with the "nv" driver) is uncommented. When using this file, X starts without a problem. When I comment line number 196 and uncomment line number 197 (the one with the "nvidia" driver) X fails to start with the above error.
The following is the requested configuration information.
Video Card: nVidia GeForce 440 Go
Driver Version: 1.0.6106
Distribution: Gentoo 2.6.5-gentoo-r1 kernel
Video Bios Version: rev a3
Processor: 2Ghz Pentium 4 Mobile
Motherboard Model: Dell Latitude C840
NOTE: The Video Bios Version was determined by issuing the lspci command. The "/proc/driver/nvidia/cards/0" directory didn't exist when using the stock nv driver.
I'm running version 6.7.0-r1 of the X-org X11 (not XFree86).
Re: 6106 nVidia Driver Doesn't Work But Stock nv Driver Does
Just to note ... in this problem seems to have gone away with the 6111 driver. I'm able to use the nVidia drivers again. Now I just have to isolate the resolution to the flicker problem.
|All times are GMT -5. The time now is 05:42 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.