Red Hat WS2.1 and 5336
I was having a lot of problems installing the linux graphics driver on WS2.1 update 3
Someone finally gave me this fix that worked for me so I thought I'd post it here to help others.
The other tip is to try WS2.1 Update 4 and 6106.
The problem comes from a compile error. The driver can't compile properly with the default configuration. The workaround is to edit the file rhconfig.h in /usr/src/linux-2.4/include/linux. Open the file with a text editor and comment out lines 31-33 using standard C syntax as shown below:
/*#if defined(__BOOT_KERNEL_SUMMIT) && (__BOOT_KERNEL_SUMMIT == 1)
#endif __BOOT_KERNEL_ENTERPRISE */
This does not appear to have any negative affects on the system and allows the driver installation to re-compile successfully.
NOTE: This modification may also be needed to properly re-compile other new drivers. In at least one case, the Broadcomm ethernet drivers would not compile properly without this mod.
|All times are GMT -5. The time now is 03:10 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.