nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA FreeBSD (http://www.nvnews.net/vbulletin/forumdisplay.php?f=47)
-   -   FreeBSD nvidia driver issue (http://www.nvnews.net/vbulletin/showthread.php?t=32331)

nullpt 07-18-04 01:41 AM

FreeBSD nvidia driver issue
 
Hello,

I'm having some issues with the nvidia driver for freebsd. I install the driver trough the ports system .

phobos# cd /usr/ports/x11/nvidia-driver/
phobos# make install

Eveything install fine except the make setup that seems to be broken.

phobos# pkg_info | grep nvidia
nvidia-driver-1.0.4365_2 NVidia graphics card binary drivers for hardware OpenGL ren
phobos# cd work/NVIDIA-FreeBSD-x86-1.0-4365
phobos# make setup
===> module
"Makefile", line 17: Malformed conditional (${OSVERSION} > 500011)
"Makefile", line 17: Need an operator
"Makefile", line 19: if-less endif
"Makefile", line 19: Need an operator
make: fatal errors encountered -- cannot continue
*** Error code 1

Stop in /usr/ports/x11/nvidia-driver/work/NVIDIA-FreeBSD-x86-1.0-4365.

Bu the make setup is option i think.

phobos# kldload nvidia
Jul 18 07:03:17 phobos kernel: nvidia0: <GeForce2 MX/MX 400> mem 0xd0000000-0xd7ffffff,0xde000000-0xdeffffff irq 4 at device 0.0 on pci1
# kldstat
Id Refs Address Size Name
1 3 0xc0400000 65a558 kernel
2 1 0xc4711000 187000 nvidia.ko
phobos# kldunload nvidia
Jul 18 07:04:09 phobos kernel: nvidia0: detached
phobos# kldstat
Id Refs Address Size Name
1 1 0xc0400000 65a558 kernel
phobos#

All fine till here (except for the make setup).
I setup X and gnome and it works fine with the default nv driver. When I switch to the nvidia driver my XFreeConfig is equal to the default one, I only change the nv driver to nvidia and i take out dri, record and xtrap from the Secton "Module".
Here is the sections:
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
Load "speedo"
Load "freetype"
Load "type1"
EndSection

Section "Device"
Option "NvAGP" "1"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV11 [GeForce2 MX/MX 400]"
BusID "PCI:1:0:0"
EndSection

The rest of the config is the default.
When I startx I don't see any output it just leads me to a screen full of crazy characters and symbols and I can't get out (Ctrl^c, ctrl+alt+backspace) until it shuts down the machine. It seems like there is some sort of problem somewhere and I can't find it. I had this machine as my freebsd desktop with freebsd 5.2.1-releasep9 for almost a month and it worked just fine with nvidia driver but then i had to reinstall everything coz i only had 6GB space for freebsd and I installed everything in a new disk. I have more than one freebsd desktop and they all run with nvidia driver, never had a problem and now this is bugging me like hell!

If anyone knows anything on this please post.

System info:

phobos# uname -a
FreeBSD phobos 5.2.1-RELEASE-p9 FreeBSD 5.2.1-RELEASE-p9 #0: Sun Jul 18 05:43:12 GMT 2004 alex@phobos:/usr/obj/usr/src/sys/phobos i386
phobos#

nvidia driver:

nvidia-driver-1.0.4365_2 NVidia graphics card binary drivers for hardware OpenGL ren

Kernel Options:

device pcm
options COMPAT_LINUX
device agp

(I tried without this options as well)

BIOS settings:

PnP-OS Aware: NO
Primary Graphic Adapter: PCI
Allocate IRQ to PCI VGA: yes

dmesg errors:

(dont know if this is an error)
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:2 INTD BIOS irq 11
pci_cfgintr: 0:2 INTA BIOS irq 5
pci_cfgintr: 0:2 INTC BIOS irq 11
pci_cfgintr: 0:2 INTC BIOS irq 11
pci_cfgintr: 0:3 INTA BIOS irq 5
pci_cfgintr: 0:9 INTA BIOS irq 5

AND

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)

Graphic card:

AGP Geforce MX 400 64MB SDRAM
It has an onboard card but it's not being used.

Thanks for your help and thanks for reading my thread!

cheers

PS: For the sake of hard trying I edited the Makefile from the modules area and fixed the condition. But the problem still persists!


All times are GMT -5. The time now is 03:18 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.