1.0-6111 Linux: Cannot load module after compile
If the installer fails to load the module after a sucessful compile on a 2.4.x x86-32 system using devfs, the error may be correctable manually.
In the log, (/var/log/nvidia-installer.log), you may see the following error message after trying to compile your own 6111 driver:
init_module: Cannot allocate memory
This error confuses the installer into thinking that the module did not compile correctly. Try manually deleting the /dev/nvidia* devices via:
rm -f /dev/nvidia*
then rerunning the installer. The module should load properly then.
The error return code set in nv.c on line 1109 is -ENOMEM when the devfs_mk_cdev fails on 2.4.x kernels. This return code causes insmod to fail correctly but print the wrong error.
This problem was seen on Santa Fe Linux CTR1, a debian based distribution.
|All times are GMT -5. The time now is 09:45 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.