nV News Forums


nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Pb with GF FX5200 and Twinview. (http://www.nvnews.net/vbulletin/showthread.php?t=35924)

sorg 08-31-04 08:05 AM

Pb with GF FX5200 and Twinview.

I have bought an Albatron Geforce FX5200LP V2.0 graphic card.

I am running it under linux.
Can i use both DVI and VGA output at the same time with 2 different screen ? as soon as my computer boots, I have currently only a "clone" mode, and when i have the 2 screens plugged at the same time, the ligthness of each screen goes down and i can see some ghost picture on the screens ( It looks like there is interference between the two screens.) Is it normal?

What can i do to avoid that ?
Is it possible to have a real dualscreen mode ?

I tried to configure xfree:

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce FX (generic)"
Option "TwinView" "1"
Option "ConnectedMonitor" "CRT,CRT"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1024x768,1024x768;800x600,800x600"

it doesn't work. It stays in Clone Mode.

Thank you in advance,


All times are GMT -5. The time now is 08:57 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.