nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   What does this error mean? (http://www.nvnews.net/vbulletin/showthread.php?t=36171)

Sugarat 09-04-04 06:28 AM

What does this error mean?
 
(WW) NVIDIA: More than one matching Device section found: Videocard2

?

Code:

# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier    "Multihead layout"
        Screen      0  "Screen0"
        Screen      1  "Screen1" RightOf "Screen0"
        Screen      2  "Screen2" LeftOf "Screen0"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option            "Xinerama" "on"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath    "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "dri"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "gb"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier  "Monitor0"
        VendorName  "Monitor Vendor"
        ModelName    "GDM-5510"
        HorizSync    30.0 - 130.0
        VertRefresh  48.0 - 170.0
        Option            "dpms"
EndSection

Section "Monitor"
        Identifier  "Monitor1"
        VendorName  "Monitor Vendor"
        ModelName    "Monitor 1280x1024"
        HorizSync    31.5 - 79.0
        VertRefresh  50.0 - 90.0
        Option            "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nvidia"
        VendorName  "Videocard vendor"
        BoardName  "NVIDIA GeForce FX (generic)"
        Option "ConnectedMonitor" "CRT-0"
        #Screen 0
        #BusID "PCI:1:0:0"
EndSection

Section "Device"
        Identifier  "Videocard1"
        Driver      "radeon"
        VendorName  "Videocard Vendor"
        BoardName  "ATI Radeon 7000"
        BusID      "PCI:2:5:0"
        #Screen 1
EndSection

Section "Device"
        Identifier  "Videocard2"
        Driver      "nvidia"
        VendorName  "Videocard vendor"
        BoardName  "NVIDIA GeForce FX (generic)"
        Option "ConnectedMonitor" "CRT-1"
        #Screen 2
        Option "NoDDC" "True"
        #BusID "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device    "Videocard0"
        Option "ConnectedMonitor" "CRT-0"
        Monitor    "Monitor0"
        DefaultDepth    24
        SubSection "Display"
                Viewport  0 0
                Depth    24
                Modes    "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device    "Videocard1"
        Monitor    "Monitor1"
        DefaultDepth    24
        SubSection "Display"
                Viewport  0 0
                Depth    24
                Modes    "1280x1024"
        EndSubSection
EndSection

Section "Screen"
        Identifier "Screen2"
        Device    "Videocard2"
        Option "ConnectedMonitor" "CRT-1"
        Monitor    "Monitor0"
        DefaultDepth    24
        SubSection "Display"
                Viewport  0 0
                Depth    24
                Modes    "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode        0666
EndSection


LordMorgul 09-06-04 04:10 PM

Re: What does this error mean?
 
Quote:

Section "Screen"
Identifier "Screen2"
Device "Videocard2"
Option "ConnectedMonitor" "CRT-1"
Monitor "Monitor0"
Videocard 0 and 2 are using the same monitor, how does that work? If it is a similar monitor, define it twice, do the same if its on a KVM switch or similar.


All times are GMT -5. The time now is 12:36 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.