nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Windows Graphics Drivers (http://www.nvnews.net/vbulletin/forumdisplay.php?f=26)
-   -   How do you get the 10% antialiasing and anisotropy increase with the 30.30 drivers? (http://www.nvnews.net/vbulletin/showthread.php?t=403)

imtim83 08-04-02 06:04 PM

How exactly do you get the 10% FSAA and anisotropy increase with 30.30 drivers &...
 
How exactly do you get the 10% FSAA and anisotropy increase with 30.30 drivers and RivaTuner 2.0 Release Candidate 11.1 please? Also do you have to have the 30.30 drivers to beable to get the 10 % increase in FSAA and anisotropy?

Thanks.

DJB 08-05-02 10:21 AM

You can get an OGL AF boost running the proper patch script from withing the "poweruser" section of Rivatuner.

You can get a similar boost in D3D if you patch the driver, but only if you have a GF4. With a GF4, and the Rivatuner mod, you can specify which points in the texture pipeline get AF ( or something like that). The best place to get this answered is the Rivatuner forum at Guru3d.

DJB

eliteone 08-08-02 06:41 PM

Can I patch the *.dll file (forget the name) AFTER i install the drivers and its in my WINDOWS\system32 folder?

DJB 08-08-02 07:37 PM

yes, you can. Actually, the NVOGL.DLL file can be patched without even rebooting assuming you are not running any OGL tasks at the time. Any patching to the D3D drivers requires a reboot.

DJB

Mike89 08-08-02 11:44 PM

That ogl aniso patch script in Rivatuner won't install with the 30.82s.

This is because all the extensions in the 30.82 driver folder now have the last letter dropped and replaced with a "_".

That nvoglnt.dll is now shown as nvoglnt.dl_ and Rivatuner's script installer can't find it.

Why did Nvidia do that?

eliteone 08-09-02 12:05 AM

They wont install with the .dl_ file but it will install AFTER the drivers have been installed and the ogl.dll file is in ur windows\system32 folder.

Mike89 08-09-02 01:07 AM

When I had used Rivatuner to install the ogl aniso patch script with the 30.30 drivers, it installed the new nvoglnv.dll in the driver folder (along with a backup of the old one).

It won't do it with the 30.82 because it can't find the nvoglnv.dll in the 30.82 driver folder since it's now named different (nvoglnv.dl_).

Rivatuner's patch script isn't set up to put the file straight into the windows system32 directory. It's set up to patch the driver.

I just can't figure out why Nvidia dropped the last letter of most of the files and replaced it with _.

I supposed I could manually rename each file to put in the last character buy why didn't Nvidia do it? None of the other drivers have ever been like this to my knowledge.

eliteone 08-09-02 01:09 AM

When it says its looking for the .dll...point it to c:\windows\system32...i guarantee u the .dll file is in there. you must do this AFTER u already installed the drivers.

DJB 08-09-02 09:23 AM

Folks,

There is a problem with the script for the OGL aniso boost, and the 30.82 drivers. It doesn't matter if you patch the new dll in the install directory, or wait and patch it after you install. Just don't make the mistake of patching your old driver and then installing the new driver. :)

You will need to modify the [common] section of the patch under Win9x, the Win2K/Xp seems to work fine.

Modification of the Win9x patch is as follows;

Change the existing [common] area to :

[Common]
SrcFile = nvopengl.dll
BakFile = nvopengl.old
HlpFile = AnisoBoosterOGL.rth

;common script for pre-29.xx

;Src0 = 74 00 83 00 28 E1 00 00 00 74 00 80 00 78 01 75 00 83 00 00 00 00 00 00 75 00 F6 00 00 00 00 00 40 75 00
;SCM0 = FF 00 FF 00 FF FF FF FF FF FF 00 FF 00 FF FF FF 00 FF 00 00 00 00 00 FF FF 00 FF 00 00 00 00 00 FF FF 00
;Dst0 = 90 90 83 00 28 E1 00 00 00 74 00 80 00 78 01 75 00 83 00 00 00 00 00 00 75 00 F6 00 00 00 00 00 40 90 90
;DCM0 = 00 00 00 FF 00 00 00 00 00 00 FF 00 FF 00 00 00 FF 00 FF FF FF FF FF 00 00 FF 00 FF FF FF FF FF 00 00 00

;common script for post-29.xx

Src0 = C6 80 FE 00 00 00 00
SCM0 = FF F0 FF FF FF FF FF
Dst0 = 90 90 90 90 90 90 90
Num0 = 2

Src1 = 74 00 83 00 28 E1 00 00 00 74 00 80 00 78 01 75 00 80 00 FE 00 00 00 00 74 00 83 00 00 00 00 00 00 75 00 F6 00 00 00 00 00 40 75 00
SCM1 = FF 00 FF 00 FF FF FF FF FF FF 00 FF 00 FF FF FF 00 FF 00 FF FF FF FF FF FF 00 FF 00 00 00 00 00 FF FF 00 FF 00 00 00 00 00 FF FF 00
Dst1 = 90 90 83 00 28 E1 00 00 00 74 00 80 00 78 01 75 00 80 00 FE 00 00 00 00 74 00 83 00 00 00 00 00 00 75 00 F6 00 00 00 00 00 40 90 90
DCM1 = 00 00 00 FF 00 00 00 00 00 00 FF 00 FF 00 00 00 FF 00 FF 00 00 00 00 00 00 FF 00 FF FF FF FF FF 00 00 FF 00 FF FF FF FF FF 00 00 00




Hope this helps.

DJB

P.S. I con't want to take credit for figuring this out, as this fix is from Unwinder of Rivatuner himself, but I will take credit for passing it on to the nvnews boards. :)

D

eliteone 08-13-02 10:30 PM

What do u mean by "Just don't make the mistake of patching your old driver and then installing the new driver."? I patched my old 30.30 driver fine but after i installed the 30.82s it wont patch at all...im using windows xp.

Mike89 08-14-02 10:18 AM

The Rivatuner Aniso patch won't install in the 30.82 drivers unless you unpack that nvoglnt.dll file.

I did install the patch straight into the system32 folder. Well it caused me problems.

I tried playing Serious Sam 2 but the game would not open, displaying a message saying Serious Sam has encountered a problem and must close.

I then put the original 30.82 nvoglnt.dll back into windows/system32 and the game played fine.

imtim83 08-24-02 01:41 PM

I am still confused on how to get the 10% or more increase with FSAA and AF with detonator drivers 30.30.

Could anyone explain exactly how to do it? Like the direct3d and opengl ?


All times are GMT -5. The time now is 11:56 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.