nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   twinview: Max 24 bit rez 1024x1280? - FC3 2.6.9-1.681_FC3smp 6800 Ultra (http://www.nvnews.net/vbulletin/showthread.php?t=43222)

gmp 12-30-04 12:12 PM

twinview: Max 24 bit rez 1024x1280? - FC3 2.6.9-1.681_FC3smp 6800 Ultra
 
Fedora Core 3
2.6.9-1.681_FC3smp
Dual SGI (Sony) 20" GDM-4011P Monitors
6800 Ultra (256mb)
6629 Driver

I have been unable to get my card to output any higher that 1024x1280, 1024x1280 with my new 6800 Ultra that I installed when I upgraded from RH9 to FC3 with twinview.

As this is my main workstation for work and I typically have a gazillion graphics applications up itś a little low in terms of screen real estate for me. I would be eternally grateful if someone would help me sort this out so I could get to AT LEAST 1400x1050, 1400x1050 however 1920x1440 would be my preferance. It needs to be 24 bit however (8, 8, 8)

My xorg.conf file is pasted in below.

Thanks a million,

J

Code:

################################
##                            ##
##  Input Mode Lines Here    ##
##                            ##
################################

Section "ServerLayout"
        Identifier    "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
#
# Multiple FontPath entries are allowed (they are concatenated together)
# By default a font server independent of the X server is used to render fonts.

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath    "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "glx"
        Load  "record"
        Load  "xtrap"
        Load  "freetype"
        Load  "type1"
EndSection


# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us_intl"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier  "CRT-0"
        VendorName  "SGI"
        ModelName    "SGI 20-inch GDM-4011P"
        HorizSync    30.0 - 96.0
        VertRefresh  48.0 - 160.0
EndSection

Section "Monitor"
        Identifier  "CRT-1"
        VendorName  "SGI"
        ModelName    "SGI 20-inch GDM-4011P"
        HorizSync    30.0 - 96.0
        VertRefresh  48.0 - 160.0
EndSection

Section "Device"
        Identifier  "Card0"
        Driver      "nvidia"
        VendorName  "nVidia Corporation"
        BoardName  "Unknown Board"
        Option            "NoLogo" "yes"
EndSection

Section "Device"
        Identifier  "Card0 Twinview"
        Driver      "nvidia"
        VendorName  "nVidia Corporation"
        BoardName  "NVIDIA GeForce FX (generic)"
        Option            "TwinView"
        Option            "UseEdidFreqs" "no"
        Option            "SecondMonitorHorizSync" "30-130"
        Option            "MetaModes" "2048x1536,2048x1536; 1920x1440,1920x1440; 1600x1200,1600x1200; 1400x1050,1400x1050; 1280x1024,1280x1024; 1024x768,1024x768"
        Option            "TwinViewOrientation" "RightOf"
        Option            "ConnectedMonitor" "crt,crt"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device    "Card0 Twinview"
        Monitor    "CRT-0"
        DefaultDepth    24
        SubSection "Display"
                Depth    24
                Modes    "2048x1536" "1920x1440" "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection


Thunderbird 12-30-04 12:25 PM

Re: twinview: Max 24 bit rez 1024x1280? - FC3 2.6.9-1.681_FC3smp 6800 Ultra
 
Atleast you need to have this in your screen/device section:
Option "SecondMonitorHorizSync" "30-96"
Option "SecondMonitorVertRefresh" "48-160"


All times are GMT -5. The time now is 10:11 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.