nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Solaris (http://www.nvnews.net/vbulletin/forumdisplay.php?f=45)
-   -   Cannot get 1920x1200 on D800 (wrong virtual size) (http://www.nvnews.net/vbulletin/showthread.php?t=58062)

catalan 10-12-05 05:54 PM

Cannot get 1920x1200 on D800 (wrong virtual size)
 
Hi, I followed the instructions in http://www.nvnews.net/vbulletin/showthread.php?t=52257 to install the new nvidia driver. However, I can't seem to get to the native 1920x1200 (wuxga) resolution of my Dell D800 laptop. I keep getting the message:

(II) NVIDIA(0): Not using mode "1920x1200" (width too large for virtual size)

and

(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024

no matter what I do! I have already tried setting "Virtual 1920 1200" in subscetion "display", but to no effect.

Any suggestions?
Thanks,
Alan

catalan 10-12-05 06:07 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
More info:

/etc/X11/xorg.conf: http://pastebin.com/391727

/var/log/Xorg.0.log: http://pastebin.com/391729

Card: GeForce4 Ti 4200 Go AGP 8x

Dell D800, 1920x1200 wuxga lcd monitor

nVidia driver version 1.0-7667 on Solaris 10 (maximally patched as of 2005-10-11)

Alan Thompson
:confused:

catalan 10-13-05 06:50 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
More info: Here is the /var/log/Xorg.0.log:

OK, it no longer complains about the wrong virtual size. It even says:

(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Mode "1920x1200": 162.0 MHz, 65.3 kHz, 52.3 Hz
(**) NVIDIA(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(**) NVIDIA(0): Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
etc....

Notice how it says
(II) NVIDIA(0): Setting mode "1920x1200"
and then later
(II) NVIDIA(0): Setting mode "1280x1024"

Very curious! Anybody got any clues?
Alan Thompson


Code:

X Window System Version 6.8.2 (Sun Xorg Release 1.1 for Solaris 10)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SunOS 5.10 Generic i86pc
Current Operating System: SunOS dhcp-161-170 5.10 Generic_118844-19 i86pc
Build Date: 02 August 2005
SUNWxorg-server package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-server patches applied: 118966-07 119062-01 118966-08
SUNWxorg-graphics-ddx package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-graphics-ddx patches applied: 118966-07 118966-08
        Before reporting problems, check http://sunsolve.sun.com/
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 13 16:40:44 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |  |-->Monitor "NVIDIA NV28 32MB custom"
(**) |  |-->Device "** NVIDIA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "inspiron"
(**) XKB: model: "inspiron"
(**) Option "XkbLayout" "en_US"
(**) XKB: layout: "en_US"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11/lib/X11/fonts/TrueType/,/usr/X11/lib/X11/fonts/Type1/,/usr/X11/lib/X11/fonts/Type1/sun/,/usr/X11/lib/X11/fonts/F3bitmaps/,/usr/X11/lib/X11/fonts/misc/,/usr/X11/lib/X11/fonts/100dpi/,/usr/X11/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11/lib/X11/rgb"
(==) ModulePath set to "/usr/X11/lib/modules"
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.7
        X.Org XInput driver : 0.4
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
(II) Loader running on solaris
(II) LoadModule: "bitmap"
(II) Loading /usr/X11/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
        compiled for 6.8.0, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 6.8.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7

<snip>

(II) LoadModule: "dbe"
(II) Loading /usr/X11/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 6.8.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD

<snip>

(II) Setting vga for screen 0.
(++) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "FlatPanelProperties" "Scaling = aspect-scaled"
(**) NVIDIA(0): FlatPanelProperties string: "Scaling = aspect-scaled"
(--) NVIDIA(0): Linear framebuffer at 0xF0000000
(--) NVIDIA(0): MMIO registers at 0xFC000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 4200 Go
(--) NVIDIA(0): VideoBIOS: 04.28.20.31.c1
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(II) NVIDIA(0): Connected display device(s): DFP-0
(--) NVIDIA(0): DFP-0: maximum pixel clock: 165 MHz
(--) NVIDIA(0): DFP-0: External Dual Link LVDS
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
(WW) NVIDIA(0): config file hsync range 28-110kHz not within DDC hsync ranges.
(WW) NVIDIA(0): config file vrefresh range 43-90Hz not within DDC vrefresh ranges.
(II) NVIDIA(0): NVIDIA NV28 32MB custom: Using hsync range of 28.00-110.00 kHz
(II) NVIDIA(0): NVIDIA NV28 32MB custom: Using vrefresh range of 43.00-90.00 Hz
(II) NVIDIA(0): Clock range:  12.00 to 165.00 MHz
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) NVIDIA(0): Not using mode "1024x768" (height 1536 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "960x720" (height 1440 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "928x696" (height 1392 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0):  horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "960x600":
(WW) NVIDIA(0):  horizontal blanking width ((max(1258,1086) - min(960,968) =
(WW) NVIDIA(0):      298) not a multiple of 8
(WW) NVIDIA(0):  horizontal sync width (1086 - 968 = 118) not a multiple of
(WW) NVIDIA(0):      8
(WW) NVIDIA(0):  horizontal frame length (1258) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0):  horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0):  horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0):      Mode "1920x1200": 162.0 MHz, 65.3 kHz, 52.3 Hz
(**) NVIDIA(0):      Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(**) NVIDIA(0):      Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0):      Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0):      Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(0):      Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0):      Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
(**) NVIDIA(0):      Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0):      Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(**) NVIDIA(0):      Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(**) NVIDIA(0):      Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0):      Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0):      Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(**) NVIDIA(0):      Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(**) NVIDIA(0):      Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0):      Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(0):      Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0):      Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0):      Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(--) NVIDIA(0): Display dimensions: (330, 210) mm
(--) NVIDIA(0): DPI set to (147, 145)

<snip>

(II) NVIDIA(0): Setting mode "1920x1200"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse disabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(II) Mouse1: Setting Device option to "/dev/mouse"
(**) Mouse1: Protocol: VUID
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(II) Mouse1: Setting Buttons option to "3"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Kernel Input Handler" (type: Other)
(--) Keyboard type: USB (6)
(--) Keyboard layout: 33
(II) NVIDIA(0): Setting mode "1280x1024"
AUDIT: Thu Oct 13 16:41:04 2005: 523 Xorg: client 9 rejected from local host
AUDIT: Thu Oct 13 16:41:06 2005: 523 Xorg: client 10 rejected from local host


catalan 10-13-05 06:52 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
And here is the current /etc/X11/xorg.conf file:

# Generated by root on dhcp-161-170 at Tue Oct 4 13:54:28 2005
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# ************************************************** ********************
# Refer to the xorg.conf(4) man page for details about the format of
# this file.
# ************************************************** ********************

# ************************************************** ********************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# ************************************************** ********************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "bitstream"
Load "type1"
# Load "speedo"

# This loads the Xst module
Load "Xst"
# This loads the SolarisIA module
Load "IA"
# This loads the GLX module
Load "glx"

EndSection

# ************************************************** ********************
# Files section. This allows default font and rgb paths to be set
# ************************************************** ********************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/X11/lib/X11/fonts/TrueType/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/100dpi/"
FontPath "/usr/X11/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11/lib/X11/fonts/local/"
# FontPath "/usr/X11/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11/lib/X11/fonts/freefont/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11/lib/modules"

EndSection

# ************************************************** ********************
# Server flags section.
# ************************************************** ********************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# ************************************************** ********************
# Input devices
# ************************************************** ********************

# ************************************************** ********************
# Core keyboard's InputDevice section
# ************************************************** ********************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "inspiron"
Option "XkbLayout" "en_US"

EndSection


# ************************************************** ********************
# Core Pointer's InputDevice section
# ************************************************** ********************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# ************************************************** ********************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# ************************************************** ********************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# ************************************************** ********************
# Monitor section
# ************************************************** ********************

# Any number of monitor sections may be present

# from http://www.linuxquestions.org/questi...04/07/3/195620
Section "Monitor"
Identifier "NVIDIA NV28 32MB custom"
# HorizSync is in kHz unless units are specified.
HorizSync 28-110
# VertRefresh is in Hz unless units are specified.
VertRefresh 43-90
# DisplaySize 344.5 222.5
# Option "DPMS"
Modeline "1920x1200" 162 1920 1984 2176 2480 1200 1201 1204 1250 +hsync +vsync
EndSection


# ************************************************** ********************
# Graphics device section
# ************************************************** ********************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "** NVIDIA"
Driver "nvidia"
# Option "DPMS"
EndSection


# ************************************************** ********************
# Screen sections
# ************************************************** ********************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** NVIDIA"
Monitor "NVIDIA NV28 32MB custom"
DefaultDepth 24
# Option "IgnoreEDID" "true"
# Option "FlatPanelProperties" "Scaling=centered"
Option "FlatPanelProperties" "Scaling = aspect-scaled"

Subsection "Display"
Depth 8
Virtual 1920 1200
Modes "1920x1200" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Virtual 1920 1200
Modes "1920x1200" "1400x1050" "1600x1200" "1280x1024" "1024x768" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Virtual 1920 1200
Modes "1920x1200" "1400x1050" "1600x1200" "1280x1024" "640x400"
ViewPort 0 0
EndSubsection
EndSection

# ************************************************** ********************
# ServerLayout sections.
# ************************************************** ********************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection

zander 10-14-05 05:12 AM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
@catalan: which resolution did you specify in the JDE preferences (Launch -> Preferences -> Desktop Preferences -> Display -> Screen Resolution) for your user?

catalan 10-17-05 12:54 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
OK - I got it working at full resolution! The problem appears to have been bad(?) desktop files. I deleted all the following files and forced the system to re-create them:

/.ICEauthority
/.Xauthority
/.dt
/.dtprofile
/.gconf
/.gconf-csw
/.gconfd
/.gnome
/.gnome2
/.gnome2_private
/.gnupg
/.gtkrc-1.2-gnome2
/.smc.properties
/.sunw

It appears that my /etc/X11/xorg.conf was OK after all (after a lot of tweaking). The strange part is that the /var/log/Xorg.0.log first said it was in 1920x1200 mode, then switched later to 1280x1024. I now believe that something in the /.dt or other files was causing this switch back from max resolution. Trying to change the resolution via JDE preferences (Launch -> Preferences -> Desktop Preferences -> Display -> Screen Resolution) did not show an option larger than 1280x1024, though. So, I was perplexed and found the answer only by luck. Everything is working great now.

Alan Thompson

catalan 10-17-05 01:02 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
More info: :)

This works at 1920x1200 resolution (i.e. WUXGA) on a Dell D800 running Solaris 10, with all patches as of 2005-10-17. I am using the new "nvidia" driver (not the "nv" driver) installed by following the instrucitons at http://www.nvnews.net/vbulletin/showthread.php?t=52257.

Video card is:

nVidia Corporation NV28 [GeForce4 Ti 4200 Go AGP 8x] rev 161
NVIDIA(0): VideoRAM: 32768 kBytes

Here is my working /etc/X11/xorg.conf file:

# Generated by root on dhcp-161-170 at Tue Oct 4 13:54:28 2005
# ************************************************** ********************
# Refer to the xorg.conf(4) man page for details about the format of
# this file.
# ************************************************** ********************

# ************************************************** ********************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# ************************************************** ********************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "bitstream"
Load "type1"
# This loads the Xst module
Load "Xst"
# This loads the SolarisIA module
Load "IA"
# This loads the GLX module
Load "glx"
EndSection

# ************************************************** ********************
# Files section. This allows default font and rgb paths to be set
# ************************************************** ********************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11/lib/X11/fonts/TrueType/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/100dpi/"
FontPath "/usr/X11/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11/lib/X11/fonts/local/"
# FontPath "/usr/X11/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11/lib/X11/fonts/freefont/"

# The module search path. The default path is shown here.
# ModulePath "/usr/X11/lib/modules"
EndSection

# ************************************************** ********************
# Server flags section.
# ************************************************** ********************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"
EndSection

# ************************************************** ********************
# Input devices
# ************************************************** ********************

# ************************************************** ********************
# Core keyboard's InputDevice section
# ************************************************** ********************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "inspiron"
Option "XkbLayout" "en_US"
EndSection


# ************************************************** ********************
# Core Pointer's InputDevice section
# ************************************************** ********************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"
EndSection


# ************************************************** ********************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# ************************************************** ********************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# ************************************************** ********************
# Monitor section
# ************************************************** ********************

# Any number of monitor sections may be present

# from http://www.linuxquestions.org/questi...04/07/3/195620
Section "Monitor"
Identifier "NVIDIA NV28 32MB custom"
# HorizSync is in kHz unless units are specified.
HorizSync 28-110
# VertRefresh is in Hz unless units are specified.
VertRefresh 43-90
# DisplaySize 344.5 222.5
# Option "DPMS"
Modeline "1920x1200" 162 1920 1984 2176 2480 1200 1201 1204 1250 +hsync +vsync
EndSection


# ************************************************** ********************
# Graphics device section
# ************************************************** ********************
# Any number of graphics device sections may be present

# Device configured by xorgconfig:
Section "Device"
Identifier "** NVIDIA"
Driver "nvidia"
# Option "DPMS"
EndSection

# ************************************************** ********************
# Screen sections
# ************************************************** ********************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** NVIDIA"
Monitor "NVIDIA NV28 32MB custom"
DefaultDepth 24
# Option "IgnoreEDID" "true"
# Option "FlatPanelProperties" "Scaling=centered"
# Option "FlatPanelProperties" "Scaling = aspect-scaled"

Subsection "Display"
Depth 8
Virtual 1920 1200
Modes "1920x1200" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Virtual 1920 1200
Modes "1920x1200" "1400x1050" "1600x1200" "1280x1024" "1024x768" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Virtual 1920 1200
Modes "1920x1200" "1400x1050" "1600x1200" "1280x1024" "640x400"
ViewPort 0 0
EndSubsection
EndSection

# ************************************************** ********************
# ServerLayout sections.
# ************************************************** ********************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

catalan 10-17-05 01:11 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
More info: :)

The working 1920x1200 modeline

Modeline "1920x1200" 162 1920 1984 2176 2480 1200 1201 1204 1250 +hsync +vsync

in the Monitor section is from linuxquestions.org

I also switched from a default pixel depth of 16 bits to 24 bits in the "Screen" section - I don't know if this made any difference or not.

# from http://www.linuxquestions.org/questi...04/07/3/195620

Code:

Section "Monitor"
    Identifier  "NVIDIA NV28 32MB custom"
    # HorizSync is in kHz unless units are specified.
    HorizSync  28-110
    # VertRefresh is in Hz unless units are specified.
    VertRefresh 43-90
    # DisplaySize 344.5 222.5
    # Option "DPMS"
    Modeline "1920x1200" 162 1920 1984 2176 2480 1200 1201 1204 1250 +hsync +vsync
EndSection


catalan 10-17-05 01:19 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
More Info: I have now deleted the 3 lines which read

Code:

        Virtual    1920 1200
Also, I am running the JDS (Java Desktop System).

catalan 10-17-05 01:30 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
Here is the working /var/log/Xorg.0.log file:

X Window System Version 6.8.2 (Sun Xorg Release 1.1 for Solaris 10)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SunOS 5.10 Generic i86pc
Current Operating System: SunOS dhcp-161-170 5.10 Generic_118844-19 i86pc
Build Date: 02 August 2005
SUNWxorg-server package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-server patches applied: 118966-07 119062-01 118966-08
SUNWxorg-graphics-ddx package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-graphics-ddx patches applied: 118966-07 118966-08
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 17 11:25:29 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "NVIDIA NV28 32MB custom"
(**) | |-->Device "** NVIDIA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "inspiron"
(**) XKB: model: "inspiron"
(**) Option "XkbLayout" "en_US"
(**) XKB: layout: "en_US"
(==) Keyboard: CustomKeycode disabled
<snip>
(II) Loader running on solaris
(II) LoadModule: "bitmap"
(II) Loading /usr/X11/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
<snip>
(II) LoadModule: "glx"
(II) Loading /usr/X11/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.7676
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11/lib/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.7676
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "Keyboard"
(WW) Warning, couldn't open module Keyboard
(II) UnloadModule: "Keyboard"
(EE) Failed to load module "Keyboard" (module does not exist, 0)
(II) NVIDIA dlloader X Driver 1.0-7676 Fri Jul 29 13:25:02 PDT 2005
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
<snip>
(II) Setting vga for screen 0.
(++) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xF0000000
(--) NVIDIA(0): MMIO registers at 0xFC000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 4200 Go
(--) NVIDIA(0): VideoBIOS: 04.28.20.31.c1
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(II) NVIDIA(0): Connected display device(s): DFP-0
(--) NVIDIA(0): DFP-0: maximum pixel clock: 165 MHz
(--) NVIDIA(0): DFP-0: Internal Single Link TMDS
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(WW) NVIDIA(0): config file hsync range 28-110kHz not within DDC hsync ranges.
(WW) NVIDIA(0): config file vrefresh range 43-90Hz not within DDC vrefresh ranges.
(II) NVIDIA(0): NVIDIA NV28 32MB custom: Using hsync range of 28.00-110.00 kHz
(II) NVIDIA(0): NVIDIA NV28 32MB custom: Using vrefresh range of 43.00-90.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 165.00 MHz
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) NVIDIA(0): Not using mode "1024x768" (height 1536 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "960x720" (height 1440 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "928x696" (height 1392 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "960x600":
(WW) NVIDIA(0): horizontal blanking width ((max(1258,1086) - min(960,968) =
(WW) NVIDIA(0): 298) not a multiple of 8
(WW) NVIDIA(0): horizontal sync width (1086 - 968 = 118) not a multiple of
(WW) NVIDIA(0): 8
(WW) NVIDIA(0): horizontal frame length (1258) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Mode "1920x1200": 162.0 MHz, 65.3 kHz, 52.3 Hz
(**) NVIDIA(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(**) NVIDIA(0): Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(**) NVIDIA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): Display dimensions: (330, 210) mm
(--) NVIDIA(0): DPI set to (147, 145)
<snip>
(II) NVIDIA(0): Setting mode "1920x1200"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse disabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
<snip>
(--) Keyboard type: USB (6)
(--) Keyboard layout: 33
AUDIT: Mon Oct 17 11:25:36 2005: 1374 Xorg: client 9 rejected from local host
AUDIT: Mon Oct 17 11:25:37 2005: 1374 Xorg: client 10 rejected from local host

Telehubby 06-22-11 04:17 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
I am having this same issue, I can not get 1920x1200 to work on my D800. I have tried updating my drivers, and messing with the video settings and nothing is working for me. If anyone can help me out with this issue I would greatly appreciate it, this issue has become a major nuisance and it would be great to finally resolve it. I was wondering, where should I go to buy a new Nvidia card? Should I check out hhgregg, or would I be better off shopping online? Thank you.

vaslimdt 06-25-11 07:18 PM

Re: Cannot get 1920x1200 on D800 (wrong virtual size)
 
Quote:

Originally Posted by catalan (Post 722053)
Here is the working /var/log/Xorg.0.log file:


Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 17 11:25:29 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "NVIDIA NV28 32MB custom"
(**) | |-->Device "** NVIDIA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "inspiron"
(**) XKB: model: "inspiron"
(**) Option "XkbLayout" "en_US"
(**) XKB: layout: "en_US"
(==) Keyboard: CustomKeycode disabled
<snip>
(II) Loader running on solaris
(II) LoadModule: "bitmap"
(II) Loading /usr/X11/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
<snip>
(II) LoadModule: "glx"
(II) Loading /usr/X11/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.7676
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11/lib/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.7676
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "Keyboard"
(WW) Warning, couldn't open module Keyboard
(II) UnloadModule: "Keyboard"
(EE) Failed to load module "Keyboard" (module does not exist, 0)
(II) NVIDIA dlloader X Driver 1.0-7676 Fri Jul 29 13:25:02 PDT 2005
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
<snip>
(II) Setting vga for screen 0.
(++) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xF0000000
(--) NVIDIA(0): MMIO registers at 0xFC000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 4200 Go
(--) NVIDIA(0): VideoBIOS: 04.28.20.31.c1
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(II) NVIDIA(0): Connected display device(s): DFP-0
(--) NVIDIA(0): DFP-0: maximum pixel clock: 165 MHz
(--) NVIDIA(0): DFP-0: Internal Single Link TMDS
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(WW) NVIDIA(0): config file hsync range 28-110kHz not within DDC hsync ranges.
(WW) NVIDIA(0): config file vrefresh range 43-90Hz not within DDC vrefresh ranges.
(II) NVIDIA(0): NVIDIA NV28 32MB custom: Using hsync range of 28.00-110.00 kHz
(II) NVIDIA(0): NVIDIA NV28 32MB custom: Using vrefresh range of 43.00-90.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 165.00 MHz
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) NVIDIA(0): Not using mode "1024x768" (height 1536 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "960x720" (height 1440 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "928x696" (height 1392 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "960x600":
(WW) NVIDIA(0): horizontal blanking width ((max(1258,1086) - min(960,968) =
(WW) NVIDIA(0): 298) not a multiple of 8
(WW) NVIDIA(0): horizontal sync width (1086 - 968 = 118) not a multiple of
(WW) NVIDIA(0): 8
(WW) NVIDIA(0): horizontal frame length (1258) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Mode "1920x1200": 162.0 MHz, 65.3 kHz, 52.3 Hz
(**) NVIDIA(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(**) NVIDIA(0): Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(**) NVIDIA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): Display dimensions: (330, 210) mm
(--) NVIDIA(0): DPI set to (147, 145)
<snip>
(II) NVIDIA(0): Setting mode "1920x1200"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse disabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
<snip>
(--) Keyboard type: USB (6)
(--) Keyboard layout: 33
AUDIT: Mon Oct 17 11:25:36 2005: 1374 Xorg: client 9 rejected from local host
AUDIT: Mon Oct 17 11:25:37 2005: 1374 Xorg: client 10 rejected from local host



Thanks for this. It helped a ton.


All times are GMT -5. The time now is 09:58 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.