nV News Forums


nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Device not found error, have 6200 (http://www.nvnews.net/vbulletin/showthread.php?t=63048)

lunchlady55 01-09-06 12:49 PM

Device not found error, have 6200
2 Attachment(s)

I have the following card:
01:00.0 VGA compatible controller: nVidia Corporation GeForce 6200 (rev
a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 81c7
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0

When starting x.org, I get a message stating that no devices were found.

The nvidia module seems to load fine:
(from dmesg)
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec
14 16:22:51 PST 2005

I've attached my xorg.conf file and the xorg server log.

If anyone can tell me what I'm doing wrong, that would be greatly
appreciated. I've commented out the DRI module and ran opengl-update.

zander 01-09-06 12:59 PM

Re: Device not found error, have 6200
Your X server was built w/o module loader support, please check your use flags for static.

lunchlady55 01-09-06 02:00 PM

Re: Device not found error, have 6200
I'm using gentoo, and I did have the static flag set in make.conf. I've set it to "-static" and am recompiling now.

Thank you for your help.

lunchlady55 01-09-06 03:56 PM

Re: Device not found error, have 6200
Yup, everything works great now. Thanks again for your help.

All times are GMT -5. The time now is 10:33 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.