TwinView monitors reversed
 

I'm pretty much a newbie to working with linux yet i've been able to finally get my twinview display to work at 90%... with one issue. My monitors are reversed and I need to swap them. Yes, yes, I could just swap the connectors on the back of the computer but then when i dual boot back into XP i'd have the same situation. Could anyone tell me how to swap the monitors in the XF86Config-4? Here are my current settings:

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-96
VertRefresh 48-160
Option "dpms"

# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
# no known options
Identifier "NVIDIA GeForce 4 (generic)"
Driver "nvidia"
VendorName "NVIDIA GeForce 4 (generic)"
BoardName "NVIDIA GeForce 4 (generic)"

#BusID
EndSection

Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 4 (generic)"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView"
Option "SecondMonitorHorizSync" "30-96"
Option "SecondMonitorVertRefresh" "48-160"

Option "MetaModes" "1280x1024,1280x1024"
Option "ConnectedMonitor" "CRT,CRT"
Subsection "Display"
Depth 24
Modes "1600x1200" "1400x1050" "1280x1024"
"1152x864" "1024x768" "800x600" "640x480"
EndSubsection

EndSection

Section "DRI"
Mode 0666
EndSection

same problem here and I see that every post for this problem on this forum have no reply.

Does someone can explain to us why to reorder secondary monitor as SECONDARY monitor and get back primary as primary ????

I've tryed both TwinView and Section "R" in the readme...

view this topic related to my problem (the second reply)

http://www.nvnews.net/vbulletin/show...ew+OR+twinview

Search for "LeftOf" in the readme.
Q.