3D drivers can't work
when I run nv_check.sh.txt, it said
All the files seem to exist. Now I'm going to see if your kernel
module is loaded correctly...
the NVdriver kernel module does not seem to be loaded. The 3D
drivers will not work without it...please compile it for your
kernel, set it up to insert the module on boot, then run
this script again.
what should I do?please
My OS is Redhat 8.0, I have installed NVIDIA_kernel-1.0-4191.rh80up_2.4.18_18.8.0.i386.rpm
I can tell you another way of getting your drivers to work
download nvidia kernel and glx source drivers
open xterm and go into super user mode
type in rpmbuild --rebuild nvidia_kernel whatever .src.rpm
the same for the GLX driver
then more over to you /usr/src/whatever/whatever
and rpm -ivh nvidia_kernel.whatever.i386.rpm
and the same for your GLX drivers
then restart you computer
this worked for me
geforce 4 ti 400
also read this post for more help
or oyou can move over to your /sbin dir and type in modprobe nvidia and restart
this also worked for me when i mod one of my files
Thanks for your reply. I've try it, but it's not work well . It said I can't run the command "rpm -ivh" in graphical interface.
Your original problem is that the version of nv_check that you were running does not know enough about 4191 -- it only really works well with 1251 (or possibly 1541) and older.
I've got a version that works OK with 4191; I'll attach it.
Thanks, I've run it and it's OK!
|All times are GMT -5. The time now is 06:53 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.