nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Legacy Graphics Cards (http://www.nvnews.net/vbulletin/forumdisplay.php?f=37)
-   -   No DVI output with GeForce MX 440 (http://www.nvnews.net/vbulletin/showthread.php?t=66024)

barakor1 03-09-06 08:48 AM

No DVI output with GeForce MX 440
 
I just bought an nVidia GeForce MX 440 with VGA, DVI and S-Video output. I have a monitor that only has DVI input (it's an old one), and I don't see anything on it. I'm talking about the initial text mode messages where it says which hard disks are connected to your IDE. I borrowed an analog CRT monitor, and I see the right output from the VGA. Is there some kind of dip-switch that I need to set on the card to enable DVI output? I know this is not driver related, since it's before the OS is even loaded.

Please advise.

Note: In the end, I would use this card under Linux, and I do have some problems with the nVidia driver for Linux, but that's that's for another thread (which I've already opened).

dmilliga 04-15-06 01:49 PM

Re: No DVI output with GeForce MX 440
 
I am in the same boat. Have a GeForce4 MX 440 (Sony Vaio) and cannot get the DVI connector to output to a ViewSonic VA2012wb Monitor. Any luck with your issue that you can relay back ?

gtjr_ph 04-30-06 03:34 AM

Re: No DVI output with GeForce MX 440
 
i think you should go to nvidia control panel and set the output to the second monitor out which is the dvi.....


All times are GMT -5. The time now is 10:47 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.