Slack 8.1 & Driver 1.0-4191: total freeze
I tried to install the new nvdriver 1.0-4191 on my Slack8.1 box, but although i configured the XF86Config file, removed
all the old NVdriver occurrences in modules.conf file.
When i try to start the Xfree server i get a blank screen and my system freeze!!!! :(
I use the:
And I have a:
-GeForce II Mx200 AGP
-Abit KT7aRaid AGP 4x Motherboard
-Athlon Thunderbird 1 Ghz
I tried everything, like disable the agp support or use the Nv AGP, or the simple AGPgart, but the result was the same, i get a blank screen and my sys freeze...
The nvdriver was correctly installed and running i suppose, like the glx...
I hope that someone have resolved these this problem.....
Thanks to all and sorry for my poor English!!!
aehm is possible that nobody knows this kind of problem, please help me, ;_; nvidia support don't answer my questions...
Does using driver 3123 help?
What about pasing mem=nopentium to the kernel at boot?
Both of these are just workarounds for generic problems, I don't really know what could be causing yours. :(
Probably see at the post "StartX in 5 minutes" it's possible that your driver works fine but you need to waiting for 5-10 minutes before X starts.
The only solution appears to use 3123 drivers.....
I have installed that driver on my Slack8.1 today and it works just fine.
Did you try to look at your X-log (/var/log/XFree86.0.log)??
For example, if you had alias /dev/nvidia* NVdriver before, you have alias /dev/nvidia* nvidia now?
|All times are GMT -5. The time now is 02:30 AM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.