nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Solaris (http://www.nvnews.net/vbulletin/forumdisplay.php?f=45)
-   -   Lost DualHead with 1.0-8756 drivers (http://www.nvnews.net/vbulletin/showthread.php?t=68747)

mcerveny 04-19-06 12:14 PM

Lost DualHead with 1.0-8756 drivers
 
1 Attachment(s)
Hello,

I am using dualhead configuration from first release but it does not work with new driver 1.0-8756 (the CRT-0 output is lost).
My Xorg.0.log:
Code:

(II) NVIDIA(1): NVIDIA GPU GeForce FX Go5700 at PCI:1:0:0
(--) NVIDIA(1): VideoRAM: 65536 kBytes
(--) NVIDIA(1): VideoBIOS: 04.36.20.46.04
(II) NVIDIA(1): Detected AGP rate: 8X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce FX Go5700 at
(--) NVIDIA(1):    PCI:1:0:0:
(--) NVIDIA(1):    NVIDIA Default Flat Panel (DFP-0)
(--) NVIDIA(1): NVIDIA Default Flat Panel (DFP-0): 300 MHz maximum pixel
(--) NVIDIA(1):    clock
(--) NVIDIA(1): NVIDIA Default Flat Panel (DFP-0): Internal Single Link LVDS
(WW) NVIDIA(1): Unable to find any of the requested display device "CRT-0" in
(WW) NVIDIA(1):    the list of available display devices "".
(EE) NVIDIA(1): Unable to find available Display Devices for screen 1.

Bug or feature ?

M.C>

netllama 04-19-06 01:44 PM

Re: Lost DualHead with 1.0-8756 drivers
 
You're using the ConnectedMonitor option and UseDisplayDevice option to specify a CRT, yet no CRT is being detected. Try removing those options, and if you need more help, please post a bug report.

Thanks,
Lonni

mcerveny 04-20-06 12:46 PM

Re: Lost DualHead with 1.0-8756 drivers
 
It is working now!

The problem was in new driver functionality. I used "ConnectedMonitor" option to override/determine output in screen section with only ONE monitor string and older drivers correctly assign screen. Now I should use ALL monitor strings (to override detection) and determine output monitor by "UseDisplayDevice" option.

Solution:
1) attach monitor before X start (without option "ConnectedMonitor")
2) override detection with config like this:

Code:

Section "Screen"
    Identifier    "lcd"
    Option        "ConnectedMonitor" "DFP-0,CRT-0"
    Option        "UseDisplayDevice" "DFP-0"
  ...
EndSection

Section "Screen"
    Identifier    "crt"
    Option        "ConnectedMonitor" "DFP-0,CRT-0"
    Option        "UseDisplayDevice" "CRT-0"
  ...
EndSection

Thank you, M.C>


All times are GMT -5. The time now is 02:13 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.