New sata hard drive weird problem
I purchased a new sata hard drive exactly like another one I have. Two of the same models show up in dmesg as they should. When I boot knoppix, for example, the new drive works fine (and so do the others). But when I boot slackware (the installed os), it is not even in /dev/ (dmesg says its suppose to be /dev/sdc, and /dev/sdc1,2,3 don't even excist). I made a line for it in fstab, but that didn't fix the problem. And I also ruled out that its a kernel problem. Whats is up with this? Thanks for your help.
P.S: Is it possibly interfering with some sort of old mount configuration? (because I use to mount my usb thumb drive as /dev/sdc)...
Re: New sata hard drive weird problem
Thanks for your help [-_o].
The solution was to rebuild the dev device nodes by use of /sbin/makedev.
|All times are GMT -5. The time now is 11:37 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.