Odd problem with 1.0-9629
 

After installing 1.0-9629, my DELL 2007FPW (a 1680x1050 lcd monitor using DVI) could no longer be set into its native resolution. It always dropped back to 1280x1024. Reverting the driver back to 8776 brings back the native resolution. I tried manually setting the HorizSync/VertRefresh (not relying on EDID), but that did no good. This is with sol10u2 with current patches. This a known problem?

Re: Odd problem with 1.0-9629
 

Can you generate and post a verbose X log which captures this failure?

Thanks,
Lonni

Re: Odd problem with 1.0-9629
 

Xorg.0.log and output of nvidia-SunOS-bug-report.sh are attached for 8776 and 9629

Re: Odd problem with 1.0-9629
 

None of what you've attached is a verbose X log.

Re: Odd problem with 1.0-9629
 

I've looked at some of what you attached. In the "/etc/X11/xorg.conf" file, the section near the end:

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
# Option "TwinView" "True"
# Option "TwinViewOrientation" "RightOf"
Option "UseEdidFreqs" "True"
# Option "MetaModes" "1280x1024, 1024x768, 1024x768"
SubSection "Display"
Depth 24
# Modes "1280x1024" "1024x768" "800x600" "640x480"
Modes "1280x1024"
EndSubSection
EndSection

Try changing:


From:

"Modes "1280x1024"


To:

"Modes "1680x1050"

Paul

Re: Odd problem with 1.0-9629
 

uh, why would I do that? Screen0 *IS* a 1280x1024 flat panel.

Re: Odd problem with 1.0-9629
 

Sorry about the verbosity level. What verbosity level do you want?

Re: Odd problem with 1.0-9629
 

level 5 or 6 would be good, thanks.