nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   LAN & sound @ 2.6.16-13-3-Kernel SUSE10.1 (http://www.nvnews.net/vbulletin/showthread.php?t=81206)

hoehlenknarf 11-26-06 07:56 PM

LAN & sound @ 2.6.16-13-3-Kernel SUSE10.1
 
Hello folks,

I`ve problems configuring my LAN and audio -devices.

My system:
2.6.16-13-3-default
SUSE10.1
mainboard: asrock k8nf6g-vsta.
chipset: nvidia nf-6100-405.
integrated lan chip: realtek phy rtl8201cl

After having read http://www.nvnews.net/vbulletin/showthread.php?t=73925
I modprobed forcedeth, i810_audio and snd-hda-intel successfully (at least I guess :) ).

lsmod:
...
forcedeth
snd_hda_intel
snd_hda_codec
snd_pcm
snd
i810_audio
ac97_codec
sis900
mii
soundcore

...
and so on (sorry, cannot cut-and-paste the output )
Due to the fact that those modules were already available in the SuSE 10.1 distribution, I did not have the feeling that i should download-and-install some drivers any more (?).

lspci tells me things like
RAM memory: nVidia Corporation Unknown device ...
ISA Bridge: nVidia Corporation Unknown device ...
SMBus: nVidia Corporation Unknown device ...
RAM memory: nVidia Corporation Unknown device ...
Co-processor: nVidia Corporation Unknown device ...
USB Controller: nVidia Corporation Unknown device ...
USB Controller: nVidia Corporation Unknown device ...
PCI bridge: nVidia Corporation Unknown device ...
Audio device: nVidia Corporation Unknown device 03f0 (rev a2)
IDE interface: nVidia Corporation Unknown device ...
Bridge: nVidia Corporation Unknown device ...
IDE interface: nVidia Corporation Unknown device ...
PCI bridge: nVidia Corporation Unknown device ...
PCI bridge : nVidia Corporation Unknown device
VGA compatible controller: nVidia Corporation Unknown device ...
Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Hyper Transport Technology Configuration

...

In my oppinion this doesn`t look very well, am I right?
I tried to configure the network interface and the sound device via yast2, but had no success (no hardware was found).
To be honest I don't have a lot of experience in things like that, so could anyone please tell me how I can make these things run?


Thanks in advance!
Hoehlenknarf


All times are GMT -5. The time now is 06:07 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.