nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA FreeBSD (http://www.nvnews.net/vbulletin/forumdisplay.php?f=47)
-   -   Who can help me get 3d acceleration working? (http://www.nvnews.net/vbulletin/showthread.php?t=87934)

HXC 03-11-07 05:04 AM

Who can help me get 3d acceleration working?
 
I have tried everything I can think off but I don't get Nvidia 3d acceleration working in FreeBSD for my XFX 7800 GS. Who can help me? Here some useful information I gathered so far. Thanks in advance!

# sysctl hw.nvidia.agp.status
Code:

hw.nvidia.agp.status.status: disabled
hw.nvidia.agp.status.driver: n/a (unused)
hw.nvidia.agp.status.rate: n/a (disabled)
hw.nvidia.agp.status.fw: n/a (disabled)
hw.nvidia.agp.status.sba: n/a (disabled)

$ glxinfo | fgrep direct
Code:

direct rendering: Yes
# tail /boot/device.hints
Code:

hint.ie.0.maddr="0xd0000"
hint.fe.0.at="isa"
hint.fe.0.disabled="1"
hint.fe.0.port="0x300"
hint.lnc.0.at="isa"
hint.lnc.0.disabled="1"
hint.lnc.0.port="0x280"
hint.lnc.0.irq="10"
hint.lnc.0.drq="0"
hint.agp.0.disabled="1"

# cat /boot/loader.conf
Code:

nvidia_load="YES"
linux_load="YES"
snd_emu10k1_load="YES"

Motherboard:
Code:

Asus A8V deluxe
Chipset        VIA K8T800 Pro
North bridge        VIA K8T800 Pro
South bridge        VIA VT8237

# cat /var/log/Xorg.0.log | grep nvidia
Code:

(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"

# cat /var/log/Xorg.0.log | grep NVIDIA
Code:

(II) Module glx: vendor="NVIDIA Corporation"
(II) Module nvidia: vendor="NVIDIA Corporation"
(II) NVIDIA dlloader X Driver  1.0-9746  Tue Dec 19 13:23:45 PST 2006
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NvAGP" "1"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): Use of NVIDIA internal AGP requested
(II) NVIDIA(0): NVIDIA GPU GeForce 7800 GS at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.71.22.21.0a
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7800 GS at PCI:1:0:0:
(--) NVIDIA(0):    PHILIPS 109S4 (CRT-0)
(--) NVIDIA(0):    NVIDIA TV Encoder (TV-0)
(--) NVIDIA(0): PHILIPS 109S4 (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: NVIDIA
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):    "1280x1024"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (90, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0):    option
(II) NVIDIA(0): Setting mode "1280x1024"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled

# dmesg | grep nvidia
Code:

nvidia0: <GeForce 7800 GS> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfa000000-0xfaffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]

xorg.conf
# cat /etc/X11/xorg.conf
Code:

Section "ServerLayout"
        Identifier    "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath  "/usr/X11R6/lib/modules"
        FontPath    "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath    "/usr/X11R6/lib/X11/fonts/TTF/"
        FontPath    "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath    "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath    "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath    "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
        Load  "dbe"
#      Load  "dri"
        Load  "extmod"
        Load  "glx"
        Load  "record"
        Load  "xtrap"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/sysmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        #DisplaySize      360  270    # mm
        Identifier  "Monitor0"
        VendorName  "PHL"
        ModelName    "PHILIPS 109S4"
 ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    30.0 - 92.0
        VertRefresh  50.0 - 160.0
        Option      "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option    "SWcursor"                  # [<bool>]
        #Option    "HWcursor"                  # [<bool>]
        #Option    "NoAccel"                  # [<bool>]
        #Option    "ShadowFB"                  # [<bool>]
        #Option    "UseFBDev"                  # [<bool>]
        #Option    "Rotate"                    # [<str>]
        #Option    "VideoKey"                  # <i>
        #Option    "FlatPanel"                # [<bool>]
        #Option    "FPDither"                  # [<bool>]
        #Option    "CrtcNumber"                # <i>
        #Option    "FPScale"                  # [<bool>]
        #Option    "FPTweak"                  # <i>
        Option "NvAGP" "1"
        Identifier  "Card0"
        Driver      "nvidia"
        VendorName  "nVidia Corporation"
        BoardName  "Unknown Board"
        BusID      "AGP:01:00:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device    "Card0"
        Monitor    "Monitor0"
        DefaultDepth 24
        SubSection "Display"
                Viewport  0 0
                Depth    1
        EndSubSection
        SubSection "Display"
                Viewport  0 0
                Depth    4
        EndSubSection
        SubSection "Display"
                Viewport  0 0
                Depth    8
        EndSubSection
        SubSection "Display"
                Viewport  0 0
                Depth    15
        EndSubSection
        SubSection "Display"
                Viewport  0 0
                Depth    16
        EndSubSection
        SubSection "Display"
                Viewport  0 0
                Depth    24
                Modes  "1280x1024"
        EndSubSection
EndSection

Edit:
Updated $ glxinfo | fgrep direct

SirDice 03-12-07 06:42 AM

Re: Who can help me get 3d acceleration working?
 
What isn't working? Everything looks ok..

HXC 03-12-07 09:16 AM

Re: Who can help me get 3d acceleration working?
 
According to sysctl my nvidia agp is disabled. Moreover glxgears gives me only 5000 fps where normally I get around 13000 (glxgears Linux)

# sysctl hw.nvidia.agp.status

Code:

hw.nvidia.agp.status.status: disabled
hw.nvidia.agp.status.driver: n/a (unused)
hw.nvidia.agp.status.rate: n/a (disabled)
hw.nvidia.agp.status.fw: n/a (disabled)
hw.nvidia.agp.status.sba: n/a (disabled)

Edit:
It looks to me only 2d acceleration is enabled:

From Xorg.0.log:
Code:

(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture


adamk75 03-12-07 01:42 PM

Re: Who can help me get 3d acceleration working?
 
glxgears is not, and has never been, a benchmark.

Run an actual heavy duty 3D application before you decide if 3D acceleration is working or not.

As for AGP... Perhaps your chipset just isn't well supported. You seem to be using NvAGP, but have you tried the FreeBSD AGP support?

Adam

HXC 03-12-07 03:29 PM

Re: Who can help me get 3d acceleration working?
 
Quote:

Originally Posted by adamk75
glxgears is not, and has never been, a benchmark.

Run an actual heavy duty 3D application before you decide if 3D acceleration is working or not.

As for AGP... Perhaps your chipset just isn't well supported. You seem to be using NvAGP, but have you tried the FreeBSD AGP support?

Adam

Just to be certain I ran ppracer. From the results it's obvious that 3d acceleration isn't working:

FreeBSD
110 fps

Gentoo Linux
240 fps

Edit:
And my chipset is on the Supported NVIDIA Graphics Chips list:
http://us.download.nvidia.com/freebs...ppendix-a.html

HXC 03-12-07 03:36 PM

Re: Who can help me get 3d acceleration working?
 
Is hardware 3d acceleration supported under FreeBSD for nvidia cards? From the readme

Quote:

The NVIDIA Accelerated FreeBSD Driver Set brings accelerated 2D functionality
and high-performance OpenGL support to FreeBSD x86 with the use of NVIDIA
graphics processing units (GPUs).

These drivers provide optimized hardware acceleration for OpenGL and X
applications and support nearly all recent NVIDIA graphics chips (please see
Appendix A for a complete list of supported chips). TwinView, TV-Out and flat
panel displays are also supported.

adamk75 03-13-07 06:38 AM

Re: Who can help me get 3d acceleration working?
 
Yes, 3D acceleration is supported on nVidia cards with the nVidia FreeBSD drivers. What you quoted even says "These drivers provide optimized hardware acceleration for OpenGL and X applications ".


110 FPS under PPracer sure sounds accelerated to me. If it was reverting to software rendering, you'd probably be getting in the range of 0-5 fps.

Did you try the FreeBSD agp support like I suggested?

HXC 03-13-07 11:24 AM

Re: Who can help me get 3d acceleration working?
 
Quote:

Originally Posted by adamk75
Yes, 3D acceleration is supported on nVidia cards with the nVidia FreeBSD drivers. What you quoted even says "These drivers provide optimized hardware acceleration for OpenGL and X applications ".


110 FPS under PPracer sure sounds accelerated to me. If it was reverting to software rendering, you'd probably be getting in the range of 0-5 fps.

Did you try the FreeBSD agp support like I suggested?

Your right I do have 3d acceleration support. The performance issues are due to problems with my AGP. I get this message at boot:

Code:

login: NVRM: AGP cannot be enabled on this combination of the AMD CPU and OS kernel
NVRM: kernel upgrade recommended.


adamk75 03-13-07 11:44 AM

Re: Who can help me get 3d acceleration working?
 
So you have two options. You can either upgrade your kernel, as the message suggested, or you can try the FreeBSD agp support (assuming that the FreeBSD agp driver even supports your chipset).

Adam

HXC 03-13-07 04:00 PM

Re: Who can help me get 3d acceleration working?
 
Quote:

Originally Posted by adamk75
So you have two options. You can either upgrade your kernel, as the message suggested, or you can try the FreeBSD agp support (assuming that the FreeBSD agp driver even supports your chipset).

Adam

Do you happen where I can find a newbie friendly link with info how I can upgrade my kernel? I will test the FreeBSD AGP now.

Edit:
The FreeBSD agp driver yields the same results. meaning the same error message* and the same fps.

*login: NVRM: AGP cannot be enabled on this combination of the AMD CPU and OS kernel
NVRM: kernel upgrade recommended.

HXC 03-15-07 02:35 AM

Re: Who can help me get 3d acceleration working?
 
Ok I give up. No matter what I try I can't get it working. Thanks for trying to help :).


All times are GMT -5. The time now is 02:57 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.