nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Problems: Switching DVI with KVM using Linux nvidia driver (http://www.nvnews.net/vbulletin/showthread.php?t=88590)

Journy 03-23-07 05:15 AM

Problems: Switching DVI with KVM using Linux nvidia driver
 
Hi!

I'm running a Windows box (ATI X800XL) and a Linux PC (Nvidia GeForce 4 Ti4200) on my Eizo S2100. For switching between the PCs I use a UNICLASS 2-Port DVI/USB KVM (DVI-202AU-SK). On Linux I use the nvidia driver (1-0-9631) on openSUSE 10.2

If I start the Windows PC first, there is no problem to start the Linux PC: Both have DVI signal.

But if I start the Linux Box first and afterwards the Windows PC, the Windows PC doesn't recognize the DVI monitor and the screen is blank. If I remove the DVI cable from the Linux box just for booting, the Windows PC recognizes the DVI monitor and I can switch between the PCs without problems.

Sure, the Windows PC has an ATI; but if I change the Linux driver to the xorg nv-Driver instead of the accelerated nvidia driver, I don't get this effect and everything works smooth.

My question: How can I influence the nvidia driver to get this constellation to work?

Thx in advance,

Journy


All times are GMT -5. The time now is 02:17 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.