nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   1368x768 and 852x480 rejected modelines (http://www.nvnews.net/vbulletin/showthread.php?t=89024)

cclein 03-30-07 09:32 PM

1368x768 and 852x480 rejected modelines
 
With latest 9 series drivers I cannot run my Panasonic TY-42TM6D in it's native modes.

The two modes are rejected. here is an exerpt from the log file.

(II) NVIDIA(0): Native backend timings for Panasonic TY-42TM6D (DFP-0):
(II) NVIDIA(0): 1366 x 768 @ 60 Hz
(II) NVIDIA(0): Pixel Clock : 87.44 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1366, 1404
(II) NVIDIA(0): HSyncEnd, HTotal : 1588, 1808
(II) NVIDIA(0): VRes, VSyncStart : 768, 771
(II) NVIDIA(0): VSyncEnd, VTotal : 777, 806
(II) NVIDIA(0): H/V Polarity : -/-
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "1366x768":
(II) NVIDIA(0): 1366 x 768 @ 60 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 87.44 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1366, 1404
(II) NVIDIA(0): HSyncEnd, HTotal : 1588, 1808
(II) NVIDIA(0): VRes, VSyncStart : 768, 771
(II) NVIDIA(0): VSyncEnd, VTotal : 777, 806
(II) NVIDIA(0): H/V Polarity : -/-
(WW) NVIDIA(0): Mode is rejected: Mode's width (1366) is not a multiple of
(WW) NVIDIA(0): 8.
(II) NVIDIA(0):
(II) NVIDIA(0): Validating Mode "852x480":
(II) NVIDIA(0): 852 x 480 @ 60 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 34.24 MHz
(II) NVIDIA(0): HRes, HSyncStart : 852, 882
(II) NVIDIA(0): HSyncEnd, HTotal : 1010, 1088
(II) NVIDIA(0): VRes, VSyncStart : 480, 490
(II) NVIDIA(0): VSyncEnd, VTotal : 492, 525
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: Mode's width (852) is not a multiple of
(WW) NVIDIA(0): 8.


Any idea what I can do to get this to work? What does a multiple of 8 have to do with anything. This used to work fine in previous releases of the driver.

Thanks

wesmoc 04-12-07 11:54 AM

Re: 1368x768 and 852x480 rejected modelines
 
What does your xorg.conf look like? Specifically, what do your modelines look like?

I've got a Panasonic TH-58PX600U with the same issue. I'm pushing video over component right now, but I would prefer to be going over VGA..


All times are GMT -5. The time now is 10:12 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.