nV News Forums


nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Need xorg.conf for Olevia 537h (http://www.nvnews.net/vbulletin/showthread.php?t=89554)

hadees 04-10-07 11:49 PM

Need xorg.conf for Olevia 537h
Anyone had any luck writing an xorg.conf that will output, vga, to a Oelvia 537h HDTV?

I have been trying myself but with no luck. I am able to start xorg but TV then says it has no signal but xorg keeps running.

I think the problem might be the ModeLines but i have been unable to find ones that are specific to my set and the ones i generate also don't seem to help. Xorg also doesn't seem to be printing any useful information.

juicebox 04-11-07 04:33 AM

Re: Need xorg.conf for Olevia 537h
Sorry for the bad edits!
Have you tried 1360 x 768? According to their website their VGA is 1360 x 768 @60Hz.

This worked for someone else on a Samsung;
Modeline "1360x768" 85.500 1360 1424 1536 1792 768 771 777 795 +Hsync +Vsync

Your input should be set to VGA and not VGA-Component. You may have an AutoSync potion. At lower resolutions you should be able to be more flexible with refresh rates. It wouldn't look good but you'd get a picture to start with.

I had better luck on my 37" Sharp (HDMI) with this modeline;
ModeLine "My768p" 74.2 1216 1353 1393 1646 678 705 710 750 +hsync +vsync
even though I also have a 1366 x 768 display.
Hopefully that was more coherent,

All times are GMT -5. The time now is 01:52 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.