nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   G70GL + 100.14.03 == no modes :-( (http://www.nvnews.net/vbulletin/showthread.php?t=90710)

philipl 05-01-07 06:50 PM

G70GL + 100.14.03 == no modes :-(
 
I tried upgrading to 100.14.03 with my FX4500 and when I then tried to start X it failed because it couldn't validate any modes at all - even the auto-detect one.

I then switched back to 97.55 and everything was fine again.

I'll post a bug report later if needed, but perhaps this is a known issue - it isn't hard to reproduce. :-)

By comparision, my laptop with a 6600go works ok with these drivers.

netllama 05-01-07 06:54 PM

Re: G70GL + 100.14.03 == no modes :-(
 
I'm not able to reproduce this with 100.14.03 and a Quadro FX 4500, and I've not seen any other reports of this problem from anyone else using that combination. This is almost definitely specific to the display device that you're using. You'll need to provide a verbose bug report if you'd like further assistance.

Thanks,
Lonni

philipl 05-02-07 01:19 AM

Re: G70GL + 100.14.03 == no modes :-(
 
1 Attachment(s)
Here you go.

netllama 05-02-07 11:09 AM

Re: G70GL + 100.14.03 == no modes :-(
 
Please remove all of the following options from xorg.conf and retest:
NvAGP
ConnectedMonitor
Twinview
MetaModes
Coolbits
AllowDDCCI
TripleBuffer
FlatPanelPropteries

philipl 05-03-07 11:02 PM

Re: G70GL + 100.14.03 == no modes :-(
 
1 Attachment(s)
Removed with no change. :-(

I've attached a bug report generated without those options set.

netllama 05-03-07 11:05 PM

Re: G70GL + 100.14.03 == no modes :-(
 
You've not removed all the options that I requested.

philipl 05-04-07 12:17 AM

Re: G70GL + 100.14.03 == no modes :-(
 
1 Attachment(s)
Well, they're all gone this time, but no change in behaviour.

netllama 05-04-07 11:46 AM

Re: G70GL + 100.14.03 == no modes :-(
 
What happens if you explicitly request modes in the Screen section of xorg.conf ?

philipl 05-05-07 09:25 PM

Re: G70GL + 100.14.03 == no modes :-(
 
No change. I've attached another bug report for when I ran X with --verbose 6. It shows the EDID validation occuring but there's no additional information to explain why it thinks the GPU doesn't support the mode.

philipl 05-19-07 11:36 AM

Re: G70GL + 100.14.03 == no modes :-(
 
Lonni,

Any ideas? Have you been able to repro this in house?

Thanks,

netllama 05-19-07 10:34 PM

Re: G70GL + 100.14.03 == no modes :-(
 
I'm afraid not. This problem appears to be specific to your environment.

philipl 05-22-07 09:52 PM

Re: G70GL + 100.14.03 == no modes :-(
 
1 Attachment(s)
Well, I tried again with 100.14.06 with no change.

I've attached the latest log - it's a very simple device configuration and verbose=6.

*sigh*


All times are GMT -5. The time now is 02:35 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.