nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   General Hardware (http://www.nvnews.net/vbulletin/forumdisplay.php?f=2)
-   -   Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them? (http://www.nvnews.net/vbulletin/showthread.php?t=91733)

Digital_Trans 05-18-07 03:24 PM

Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them?
 
I want to replace my ribbon cable that runs to my Creative Sound Blaster X-Fi Fatal1ty PCI sound card. It looks old and makes the inner theme of my entire case look gay! Is their a company that makes a replacement cable so I can complete the look I'm going for?
I want a then black ribbon the same or shoter leagth if any butit must match the contact points.


-Picture attachment url: http://suprfile.com/get.php?id=7cck6it

Note: Areas are high lighted in red! :D

t3hl33td4rg0n 05-18-07 04:03 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them
 
There is a place that sells the 40pin IDE cables without the notch. You can use an IDE cable as long as the middle pin isnt keyed out and it is for one device only. People have reported that it works on the creative forums....

http://www.computercablesource.com/detail.aspx?ID=347

I need to get one myself, the one that it comes with is crap. Mine fell apart and my mic port stopped working.

SOAD 05-18-07 05:50 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them
 
WTF! Do xfi cards need cables....


I have a xtrememusic connected to Creative G500.

I just plugged the card in..... :o


Is this wrong?

buffbiff21 05-18-07 06:20 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them
 
Quote:

Originally Posted by SOAD_rule
WTF! Do xfi cards need cables....

He's talking about the cable that connects to the front bay panel that comes with the Platinum and Fatal1ty.

SOAD 05-18-07 06:23 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them
 
ah cool

cheers

Digital_Trans 05-18-07 09:01 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them
 
Quote:

Originally Posted by t3hl33td4rg0n
There is a place that sells the 40pin IDE cables without the notch. You can use an IDE cable as long as the middle pin isnt keyed out and it is for one device only. People have reported that it works on the creative forums....

http://www.computercablesource.com/detail.aspx?ID=347

I need to get one myself, the one that it comes with is crap. Mine fell apart and my mic port stopped working.


Okay, you buy one first and let me know how it turns out?
then I can proceed knowing if it worked out for you.

t3hl33td4rg0n 05-20-07 04:17 AM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them
 
http://forums.creative.com/creativel...=140527#M46396

http://forums.creative.com/creativel...=824728#M49435

Arioch 05-20-07 05:28 AM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them?
 
I have to agree those cables are crap - I had to use one from a friend's old system for my last PC as it started to come apart for some reason.

Heh - I was on the fence about getting the front panel for my X-fi on my new system. After I saw how long my Stacker 830 case was it basically put the nail in the coffin for not getting it.

Digital_Trans 05-20-07 07:46 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them
 

Thank you for the thread url links! :D

Bman212121 05-20-07 08:14 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them?
 
I can confirm that you need that missing pin on a regular IDE cable for your mic/in 2 to work properly. So getting a cable and just punching out the whole won't work. I tried sleeving the cable myself, but I tightend now the zip cable too hard and messed up the cable.

performancepcs.com will sleeve your cable for you, so that is work a look. I couldn't find a place to get a new one, but if you just look around and find one of the old 40 pin cables before they started blanking it out, that works just fine. (That is what I'm using now instead of the broken cable)

Just checked those links thought it would be nice to buy the cable from that site, but it is kind of long. All depends upon how big your case is. In mine the stock 18" cable is just the right length, but if you needed to route it around something the extra length might be needed. In a mid tower case, it would probably have all kinds of extra leftover.

Digital_Trans 05-20-07 08:36 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them?
 
Quote:

Originally Posted by Bman212121
I can confirm that you need that missing pin on a regular IDE cable for your mic/in 2 to work properly. So getting a cable and just punching out the whole won't work. I tried sleeving the cable myself, but I tightend now the zip cable too hard and messed up the cable.

performancepcs.com will sleeve your cable for you, so that is work a look. I couldn't find a place to get a new one, but if you just look around and find one of the old 40 pin cables before they started blanking it out, that works just fine. (That is what I'm using now instead of the broken cable)

Just checked those links thought it would be nice to buy the cable from that site, but it is kind of long. All depends upon how big your case is. In mine the stock 18" cable is just the right length, but if you needed to route it around something the extra length might be needed. In a mid tower case, it would probably have all kinds of extra leftover.


Okay, Question? if I order that cable from that place online and connect it to my creative sound card and to the bay drive will my mic/in work properly? because I don't want down the road hardware issues. The second option would be to performancepcs.com sleeve my current cable but if the one your suggesting off that website works then I might give it a try. :D

Here's a picture of my computer case url: http://suprfile.com/get.php?id=7cck6it

My case Dimensions: 8" x 21.5" x 18.75" (20.3cm x 54.61cm x 47.6cm)

Digital_Trans 05-30-07 09:53 PM

Re: Creative Sound Blaster X-Fi Fatal1ty cable ribbon replacement...Do They Make Them
 
I finally got the long awaited replacement ribbon you guys suggested. One side is black the other blue. Which end color goes to the sound card directly blue or black? and which end goes to the drive bay?


All times are GMT -5. The time now is 11:57 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.