nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Xlib: extension "GLX" missing on display ":0.0". (http://www.nvnews.net/vbulletin/showthread.php?t=93808)

nav_nv 06-25-07 02:09 PM

Xlib: extension "GLX" missing on display ":0.0".
 
Hi all
I am running Fedora core 2.6.18, and have a NVS 280 PCI graphics card. I am driving three displays, two from NVS 280 and one from my onboard DVI port. I am using intel 915 GM chipset. I get all the three displays up and able to run glxgears on NVS 280 displays. The problem I am facing is that on the onboard when I try running the glxgears I ge the following errors:

Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual

when I run the glxinfo I get

/usr/bin/glxinfo
name of display: :0.0
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x21 16 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x22 16 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x4b 32 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None


For the onboard DVI I use i810 as my driver.

Attached is my xorg.conf file for reference.

I am not sure why openGL is not running on the onboard.
I am not sure where I could post this, as I found a whole lot of information on google but nothing pertains to the problem I am seeing. Any suggestions or feedback would help.

Thanks
Regards.


#Xorg.conf
Section "ServerLayout"
Identifier "NVS280_MultiHead_Layout"
Screen 0 "Onboard0" 0 0
Screen 1 "PCI-Screen1" LeftOf "Onboard0"
Screen 2 "PCI-Screen2" LeftOf "PCI-Screen1"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
Option "Clone" "on"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "DontZap" "True"
Option "DefaultServerLayout" "NVS280_MultiHead_Layout"
Endsection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"

EndSection


Section "Module"
Load "i2c"
Load "dbe"
Load "glx"
Load "extmod"
Load "fbdevhw"
Load "record"
Load "freetype"
Load "bitmap"
Load "type1"
EndSection

Section "InputDevice"

Identifier "Keyboard0"
Driver "kbd"

Option "Xleds" "1 2 3"
Option "XkbRules" "xorg"
Option "AutoRepeat" "250 30"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "MAG DJ700"
DisplaySize 330 240
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 120.0
Option "dpms"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "MAG DJ700"
DisplaySize 330 240
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 120.0
Option "dpms"
EndSection

Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
Option "dpms"
EndSection

Section "Device"
Identifier "NVS_280_PCI-Device1"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA_NVS_280"
BusID "PCI:03:06:0"
Option "NoLogo" "True"
Option "NvAGP" "3"
Screen 0
EndSection

Section "Device"
Identifier "NVS_280_PCI-Device2"
Driver "nvidia"
Option "UseEdidFreqs" "True"
VendorName "NVIDIA"
BoardName "NVIDIA_NVS_280"
BusID "PCI:03:06:0"
Option "NoLogo" "True"
Option "NvAGP" "3"
Screen 1
EndSection

Section "Device"
Identifier "Onboard0"
################################################## #############
# Driver "nvidia"
# WHEN USING THIS I GET BLACK SCREEN ON ONBOARD DISPLAY
################################################## ############
Driver "i810"
VendorName "Videocard vendor"
BoardName "VESA driver (generic)"
BusID "PCI:00:02:0"
EndSection

Section "Screen"
Identifier "Onboard0"
Device "Onboard0"
Monitor "Monitor2"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1600x1200" "1024x768" "800x600" "640x480" "400x300"
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200" "1024x768" "800x600" "640x480" "400x300"
EndSubsection
EndSection

Section "Screen"
Identifier "PCI-Screen1"
Device "NVS_280_PCI-Device1"
Monitor "Monitor0"
DefaultDepth 16

Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection

Section "Screen"
Identifier "PCI-Screen2"
Device "NVS_280_PCI-Device2"
Monitor "Monitor1"
DefaultDepth 16

Subsection "Display"
Depth 16
Modes "1600x1200" "1024x768" "800x600" "640x480" "400x300"
EndSubsection

EndSection

netllama 06-25-07 02:11 PM

Re: Xlib: extension "GLX" missing on display ":0.0".
 
Please generate and attach an nvidia-bug-report.log

nav_nv 06-25-07 02:21 PM

Re: Xlib: extension "GLX" missing on display ":0.0".
 
1 Attachment(s)
Once more forgot the log report, sorry abt that.

Attached is the bug report.

Thanks
Regards

netllama 06-25-07 02:32 PM

Re: Xlib: extension "GLX" missing on display ":0.0".
 
This is expected behavior. You're trying to run glxinfo on the I810 driven X screen, however the glx module that X is using is from the nvidia driver.

nav_nv 06-25-07 02:38 PM

Re: Xlib: extension "GLX" missing on display ":0.0".
 
Thanks for the quick update...

So does that mean I cannot run openGl on the i810 display X-screen... Is there any other way I could do this. I need to program all the three X-screens with bitmaps and at the same time...

Any suggestion would be very helpful !!!

netllama 06-25-07 02:44 PM

Re: Xlib: extension "GLX" missing on display ":0.0".
 
No, that is not possible. If you need 3 X screens, then they all need to be NVIDIA GPUs.

nav_nv 06-25-07 02:52 PM

Re: Xlib: extension "GLX" missing on display ":0.0".
 
Well thats not good for me :(
Thanks for your quick help.

Regards


All times are GMT -5. The time now is 11:20 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.