nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   Benchmarking And Overclocking (http://www.nvnews.net/vbulletin/forumdisplay.php?f=24)
-   -   3D mark with new mobo (http://www.nvnews.net/vbulletin/showthread.php?t=9889)

nrdstrm 04-09-03 02:55 AM

3D mark with new mobo
 
Got some new test info for you.
I just ran 3Dmark2k3 with my new mobo and my score increased a bit. I ran the "compare" with other 2.4 ghz systems, and mine now comes up as 4th in the list (all the others are 9700pro's). My score was 5136. Other scores above me were :
5158,5189, 5430. Please keep in mind I am using 512ddr266 on a dual channel board! Next week I will purchase Corsair TwinX 1GB DDR 400 (2 X 512 DDR400 CL 2). I will run again and let you know. I tested it with Corsair (2 X 256 XMS DDR 400 (=512)) at work and improved over 2000 points on 3dmark 2k1 (we didn't have 2k3 to test it with). We shall see next week...
Rob

My Rig
P4 2.4 (533)
MSI 655Max (rev. A)
512 MB PC2100 (DDR 266) (By 1 week from Thursday - 1GB Corsair TwinX DDR 400)
GeForce FX 5800Ultra (Det. 43.45)
2 (40) GB HD (Maxtor 7200 RPM) (within 2 months - both SATA (1) WD Raptor (1000RPM 8MB) 36 GB (for winxp C Drive), (1) Seagate (7200RPM 8MB) 120GB for secondary drive.
WinXPPro (SP1)
DVD-RW, DVDROM, BLA, BLA, BLA...

Anyone else have 655 chipset with a FX5800 Ultra? Curious too see your scores/rigs...

nrdstrm 04-09-03 03:31 AM

Opps. Forgot to say that that was in quality setting.
Just redid it with Performance Setting and scored
5209! I scored Second!

Again, this is WITH DDR 266! Can't wait to test with Corsair TwinX!!!
Rob

** NOTE **
This is against P4/Athlon's Running at 2.4 Ghz. There are much higher scores on overclocked machines. In the next few weeks I plan on getting a better heatsink and I will see about overclocking my processor (or buying a new one...)

stncttr908 04-09-03 09:12 AM

Re: 3D mark with new mobo
 
Quote:

Originally posted by nrdstrm
WD Raptor (1000RPM 8MB
My god, where can I get one of these 1000rpm drives? ;)

Enjoy the new memory.

jAkUp 04-09-03 09:37 AM

hey man! nice scores there ;) so you were finally able to get the new mobo to install the drivers?? by tweaking the hell out of my system i was able to get the score in my sig... 5,402. thats without overclocking, i hope to soon up the fsb a little... since i have insane cooling... and no overclocking :D here is my 3dmark 2k3 score:
http://service.futuremark.com/compare?2k3=516989

and changing my memory speed from 333 to 400mhz i was able to get about 300 3dmarks more in 3dmark 2k3, in 3dmarks2k1 you will see an even bigger increase... since the 3dmark2k1 are more heavily reliant on the cpu and memory scores. 3kmark2k3 is mostly reliant on your video card setup/drivers etc. im sure you will see a pretty decent boost since your using 266... after you get the new memory, make sure its reading corectly in the bios.. you know, cas 2, ultra memory timings, and 2:3 to make sure its running at 200mhz, (400mhz doubled) you may have to increase voltage if its not stable.

oh, btw nrdstrm... i sent you a private message a while ago.. i dunno if you read it yet.:)


All times are GMT -5. The time now is 04:03 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.