View Single Post
Old 11-06-06, 11:30 PM   #5
achilid
Registered User
 
Join Date: Nov 2006
Posts: 12
Default Re: display corruption on GeForce 440 Go

Quote:
Originally Posted by netllama
According to the EDID, 1400x1050 is the native resolution:
aha, could this be the problem: nvidia driver wrongly recognize the native resolution?

I'm pretty sure the screen is native 1600x1200. In Windows it's 1600x1200. And following is the X log when driver "nv" is used:
=========
......
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(--) NV(0): CRTC 1 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 1
(--) NV(0): Panel size is 1600 x 1200
(II) NV(0): Panel is LVDS
(--) NV(0): VideoRAM: 65536 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): <default monitor>: Using hsync range of 31.50-75.93 kHz
(II) NV(0): <default monitor>: Using vrefresh range of 50.00-60.98 Hz
(WW) NV(0): Unable to estimate virtual size
(II) NV(0): Clock range: 12.00 to 350.00 MHz
......
=========

Any idea how to teach nvidia driver recognize the correct native resolution? Or do you need me provide any other information? Thanks!
achilid is offline   Reply With Quote