View Single Post
Old 11-07-06, 10:40 PM   #3
Registered User
Join Date: Feb 2005
Posts: 84
Default Re: 1.0-9629 doesn't get 1920x1200.

Originally Posted by netllama
I have a few questions:
0) Why are you using a 1900x1200 modeline? Does commenting it out have any impact?
- 1920x1200 is optimized resolution in my lcd 23'.
- commenting out modes 1920x1200 in xorg.conf
* Detected 1280 x 768 in 9626.
Originally Posted by "/var/log/Xorg.0.log
(--) NVIDIA(0): VideoBIOS:
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6800 GS at PCI:5:0:0:
(--) NVIDIA(0): UPV UP-M23W1D (DFP-0)
(--) NVIDIA(0): UPV UP-M23W1D (DFP-0): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): UPV UP-M23W1D (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(WW) NVIDIA(0): will be used as the requested mode.
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 768
(--) NVIDIA(0): DPI set to (40, 43); computed from "UseEdidDpi" X config
* Detected 1280 x 768 in 9629, too.

1) Please post a bug report against 1.0-9626 where the same modeline is working

Additionally, with 1.0-9629, please start X with the following command:
startx -- -logverbose 6

and then post a new bug report.

Posting bug reporting log.

Last edited by sangu; 04-22-11 at 08:12 PM.
sangu is offline   Reply With Quote