View Single Post
Old 11-09-06, 03:51 PM   #1
Nias
Registered User
 
Join Date: Aug 2004
Posts: 24
Default 9629 driver and modelines

hello,

i have a dual desktop config.
1. CRT with custom modeline
2. DFP (beamer) with custom modeline.

After starting xorg i found in my log the following:
[...]
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "NoLogo" "True"
(**) NVIDIA(1): Option "UseEDID" "FALSE"
(**) NVIDIA(1): Option "RenderAccel" "true"
(**) NVIDIA(1): Option "CursorShadow" "1"
(**) NVIDIA(1): Option "AllowGLXWithComposite" "true"
(**) NVIDIA(1): Option "ExactModeTimingsDVI" "true"
(**) NVIDIA(1): Option "Coolbits" "1"
(**) NVIDIA(1): Option "UseDisplayDevice" "DFP"
(**) NVIDIA(1): Option "DPI" "75 x 75"
(**) NVIDIA(1): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(1): Option "ModeValidation" "DFP-0: AllowNon60HzDFPModes"
(**) NVIDIA(1): Option "DisableGLXRootClipping" "true"
(**) NVIDIA(1): Enabling RENDER acceleration
(**) NVIDIA(1): Enabling cursor shadow
(II) NVIDIA(1): NVIDIA GPU GeForce 6600 GT at PCI:5:0:0 (GPU-0)
(--) NVIDIA(1): Memory: 131072 kBytes
(--) NVIDIA(1): VideoBIOS: 05.43.02.27.00
(II) NVIDIA(1): Detected PCI Express Link width: 16X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce 6600 GT at PCI:5:0:0:
(--) NVIDIA(1): CRT-0
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(1): DFP-0
(--) NVIDIA(1): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): TV encoder: NVIDIA
(II) NVIDIA(1): Option "UseDisplayDevice" "DFP" converted to "DFP-0".
(II) NVIDIA(1): Mode Validation Overrides for DFP-0:
(II) NVIDIA(1): AllowNon60HzDFPModes
(II) NVIDIA(1): Assigned Display Device: DFP-0
(WW) NVIDIA(1): No valid modes for "1280x720@50"; removing.
(WW) NVIDIA(1):
(WW) NVIDIA(1): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(1): "nvidia-auto-select".
(WW) NVIDIA(1):
(II) NVIDIA(1): Validated modes:
(II) NVIDIA(1): "nvidia-auto-select"
(II) NVIDIA(1): Virtual screen size determined to be 640 x 480

Why the driver ignores this mode?
(WW) NVIDIA(1): No valid modes for "1280x720@50"; removing.

This has worked for all previous driver releases and nothing was changed to DFP Monitor Section.
The beamer is off during powering up x11. Currently i don't have tried a start with beamer powered on.

any hints?
Nias is offline   Reply With Quote