View Single Post
Old 11-17-06, 12:39 PM   #3
neilyu
Registered User
 
Join Date: Nov 2006
Posts: 6
Question Re: Linux-x86-1.7184 compiled ok but loading failure

Code below is the section of video card in /proc/pci
Code:
Bus 1, device 0, function 0: 
     Class 0300: PCI device 10de:0150 (rev 163). 
        IRQ 10. 
        Master Capable. Latency=32. Min Gnt=5.Max Lat=1. 
        Non-prefetchable 32 bit memory at 0xe0000000 [0xe0ffffff]. 
        Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
corresponding pcitweak output was:
Code:
PCI: 01:00:0: chip 10de,0150 card 1048,0c50 rev a3 class 03,00,00 hdr 00
complete dump of {/proc/pci, pcitweak, scanpci} were saved in attachment...

From your quote, How to set the SBIOS is right ? ( my System BIOS is Award`s )

Quote:
Originally Posted by zander
NVRM: request_mem_region failed for 496M @ 0xe0ffffff.

This looks like an SBIOS problem, the PCI resource assigned to the GPU looks to be invalid (both base and size).
Attached Files
File Type: gz pcidump.tar.gz (1.2 KB, 108 views)

Last edited by neilyu; 11-17-06 at 12:52 PM.
neilyu is offline   Reply With Quote