View Single Post
Old 12-03-06, 04:07 PM   #4
rdeeming
Registered User
 
Join Date: Nov 2004
Posts: 15
Default Re: Sharp Aquos EDID FX 5700LE

Thanks so much for the info,

Doing some reading there is a good reason why Sharp does not give any EDID information about the resolution 1360x768. Because it can't.
http://en.wikipedia.org/wiki/EDID See Limitations.

So, I need to get the NVIDIA driver so it does not use the EDID data and refer to a specific mode line. I have not been successful.

Is there a different NVIDIA Option that I should be using?

Generated by http://xtiming.sourceforge.net/cgi-bin/xtiming.pl

Modeline "1360x768@59" 82.78 1360 1392 1704 1736 768 783 791 807

(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "UseEDID" "FALSE"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): Ignoring EDIDs
(II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5700LE at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.36.20.31.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5700LE at
(--) NVIDIA(0): PCI:1:0:0:
(--) NVIDIA(0): DFP-0
(--) NVIDIA(0): DFP-0: 150.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-0: Internal Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): No valid modes for "1360x768@59"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(0): Unable to get display device DFP-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from DFP-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
rdeeming is offline   Reply With Quote