View Single Post
Old 12-04-06, 02:52 PM   #18
rdeeming
Registered User
 
Join Date: Nov 2004
Posts: 15
Default Re: Sharp Aquos EDID FX 5700LE

Just saying no no no to Checks..... It was a no go.

grep -e "o \"No" README.txt | grep -e "Check"
o "NoMaxPClkCheck": each mode has a pixel clock; this pixel clock is
o "NoEdidMaxPClkCheck": a display device's EDID can specify the maximum
o "NoMaxSizeCheck": each NVIDIA GPU has a maximum resolution that it
o "NoHorizSyncCheck": a mode's horizontal sync is validated against the
o "NoVertRefreshCheck": a mode's vertical refresh rate is validated
o "NoWidthAlignmentCheck": the alignment of a mode's visible width is
o "NoDFPNativeResolutionCheck": when validating for a DFP, a mode's
o "NoVirtualSizeCheck": if the X configuration file requests a specific


Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "SHARP HDMI"
HorizSync 15.0 - 68.0
VertRefresh 55.0 - 76.0
Modeline "1360x768@59" 82.78 1360 1392 1704 1736 768 783 791 807
Modeline "1360x768@60" 84.50 1360 1392 1712 1744 768 783 791 807
Modeline "1920x1080i60" 74.25 1920 1976 2008 2200 1080 1083 1085 1125 +Hsync +Vsync Interlace
Option "DPMS"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5700LE"
Option "ModeValidation" "NoEdidModes, AllowNon60HzDFPModes, NoMaxPClkCheck, NoEdidMaxPClkCheck, NoMaxSizeCheck, NoHorizSyncCheck, NoVertRefreshCheck, NoWidthAlignmentCheck, NoDFPNativeResolutionCheck, NoVirtualSizeCheck"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080i60" "1360x768@60" "1360x768@59"
EndSubSection
EndSection
Attached Files
File Type: gz nvidia-bug-report.log.gz (26.6 KB, 102 views)
rdeeming is offline   Reply With Quote