View Single Post
Old 12-04-06, 11:15 PM   #3
alaric
Cyber Jedi
 
alaric's Avatar
 
Join Date: Aug 2003
Location: Amsterdam
Posts: 75
Default Re: Monitor is not detected at all, and ConnectedMonitor / UseDisplayDevice do not he

Quote:
Originally Posted by netllama
I don't see the problem you're reporting in the bug report you attached. The CRT is detected, however its EDID is not:
(--) NVIDIA(0): --- EDID for CRT-0 ---
(--) NVIDIA(0):
(--) NVIDIA(0): No EDID Available.
(--) NVIDIA(0):
(--) NVIDIA(0): --- End of EDID for CRT-0 ---

As 1.0-8776 is no longer supported, if you need further assistance, please clarify the problem, along with a bug report against 1.0-9631 or 1.0-9742.

Thanks,
Lonni

I'd be happy to go through the trouble of testing this with 1.0-9631 or 1.0-9742
(I can't use your installer because that overwrites libraries - and I've already
needed to buy a new PC(!!!) as a result of that before; see http://www.nvnews.net/vbulletin/show...4&postcount=13)
but this reply is very inaccurate

The CRT is *NOT* detected. You can clearly see that in my bug report.
The part that you quote doesn't prove that any CRT is detected. The whole
problem is that the EDID doesn't work by the way - but that is not relevant
in this simple case: just assume there is no EDID available.

Obviously - with no monitor detected at all - there is no EDID.

The relevant part of the attached debug log file is:

(WW) NVIDIA(0): No connected display devices detected; assuming 1 CRT

This proves that it does not detect this monitor. After *assuming* that CRT-0
exists, it then continues (immediately) with:

(WW) NVIDIA(0): Unable to read EDID for display device CRT-0

which is fine, since it can't read EDID from a non-existent monitor.
__________________
Get my email address from my homepage.
alaric is offline   Reply With Quote