View Single Post
Old 12-26-06, 04:07 PM   #5
BCKator
Registered User
 
Join Date: Aug 2006
Location: San Diego CA
Posts: 135
Default Re: 8800gtx oc- freezen winxp

JAkUp:

What is "ROP"? Real operating frequency?
I've posted elsewhere in these forums that as I slowly vary my desired 8800gtx GPU freq, the frequency is always resolved to 594, 612, 621, 648. Or, to put it another way, if I set to 605, 610, or 615 I get 612, 620, 625, 630 all get 621 and 636 gets 648. I was beginning to worry that perhaps something was wrong w/ my card so I'm glad to see something that looks like confirmation of my observations.

In response to the original question, mine won't run more than a couple of minutes at idle at 648. It will run longer at 621. It will run stressed 24/7 at 612. I'm guessing that at 640 (648 "ROP" or actual) its too fast and, after heating up, it dies. When mine dies, it locks up windows and, if left too long, BSODs. Note, I stress my OCs by running ATITool 3D view; I suggest all do the same if they want to be sure of no problems during real-world/gaming.

-- BCK
__________________
"BlackSilver": Modified air-cooled LianLi8B w/ 4 38x120mm Scythe intake fans, 16"x16" custom air filter, custom fan controller, GIGABYTE GA-P55M-UD4 (uATX), i5-750 @3.5G(turbo)OCCT linpack stable, 4G GSkill DDR, XFX 5870, Crucial 128GB SSD (OS), WD 1T CavBLack HD (data), WD 2T Green HD (backup), Corsiar CMPSU 750W PSU, PWR ~105/370W idle/max

"Green" : AsusP5Q-E, C2D8600@~4.4G(440Mx10), EVGA GTX285@~741/1692/1269, 300G Velocirator + 150G Raptorx (just for show), DVD-RW, custom H2O loop w/ Koolance CPU/GPU/NB/FET blocks in heavily modified LianLi case w/ 16"x16" input air filter, integrated 3x120 swiftech rad, dual mcp350 pumps, lots of copper pipe, custom Fan controller, & 7 Scythe SFF21F fans (~600rpm@idle, ~1400rpm@load), PWR ~160/484W idle/max.
BCKator is offline   Reply With Quote