View Single Post
Old 12-30-06, 08:20 PM   #9
blah66
Registered User
 
Join Date: Dec 2006
Posts: 12
Default Re: Setting Native Panel Resolution??? 1.0.9746

Quote:
Originally Posted by netllama
There's no 1366x768 mode in the EDID of your DFP (see the X log for the native modes in the EDID). Can you point me to where 1366x768 is documented as a native mode for this DFP?

Thanks,
Lonni
Snipped from the manual:

Product P50 HDM
Panel: 50" Diagonal, 16:9 Aspect Ratio
Resolution: 1366 x 768 pixels
Pixel (Dot) Pitch: 0.81 (H) mm x .81 mm (V)
Display Compatibility: HDTV (720p)
Signal Compatibility: 480i (SDTV), 480P (EDTV), 720P (HDTV), 1080i (HDTV)

Also, I was able to get this to work on WinXP with some slight overscan tweaking. If the EDID doesn't report properly, what is the next best option to connect the plasma? Would the TVOut option work? I.e., set it to 1080i? Or is there an issue with the 7600GT using the DVI/HDMI out as a TV Out?

Thanks!
blah66 is offline   Reply With Quote