View Single Post
Old 01-15-07, 12:58 PM   #1
chris_king
Registered User
 
Join Date: Jan 2007
Posts: 10
Default forcedeth problems.

amd system.

modinfo forcedeth
filename: /lib/modules/2.6.13/kernel/drivers/net/forcedeth.ko
parmtype: max_interrupt_work:int
parm: max_interrupt_work:forcedeth maximum events handled per interrupt
parmtype: optimization_mode:int
parm: optimization_mode:In throughput mode (0), every tx & rx packet will generate an interrupt. In CPU mode (1), interrupts are controlled by a timer.
parmtype: poll_interval:int
parm: poll_interval:Interval determines how frequent timer interrupt is generated by [(time_in_micro_secs * 100) / (2^10)]. Min is 0 and Max is 65535.
parmtype: msi:int
parm: msi:MSI interrupts are enabled by setting to 1 and disabled by setting to 0.
parmtype: msix:int
parm: msix:MSIX interrupts are enabled by setting to 1 and disabled by setting to 0.
parmtype: speed_duplex:int
parm: speed_duplex:PHY speed and duplex settings. Auto = 0, 10mbps half = 1, 10mbps full = 2, 100mbps half = 3, 100mbps full = 4, 1000mbps full = 5.
parmtype: autoneg:int
parm: autoneg:PHY autonegotiate is enabled by setting to 1 and disabled by setting to 0.
parmtype: scatter_gather:int
parm: scatter_gather:Scatter gather is enabled by setting to 1 and disabled by setting to 0.
parmtype: tso_offload:int
parm: tso_offload:TCP Segmentation offload is enabled by setting to 1 and disabled by setting to 0.
parmtype: mtu:int
parm: mtu:MTU value. Maximum value of 1500 or 9100 depending on hardware.
parmtype: tx_checksum_offload:int
parm: tx_checksum_offload:Tx checksum offload is enabled by setting to 1 and disabled by setting to 0.
parmtype: rx_checksum_offload:int
parm: rx_checksum_offload:Rx checksum offload is enabled by setting to 1 and disabled by setting to 0.
parmtype: tx_ring_size:int
parm: tx_ring_size:Tx ring size. Maximum value of 1024 or 16384 depending on hardware.
parmtype: rx_ring_size:int
parm: rx_ring_size:Rx ring size. Maximum value of 1024 or 16384 depending on hardware.
parmtype: tx_flow_control:int
parm: tx_flow_control:Tx flow control is enabled by setting to 1 and disabled by setting to 0.
parmtype: rx_flow_control:int
parm: rx_flow_control:Rx flow control is enabled by setting to 1 and disabled by setting to 0.
parmtype: dma_64bit:int
parm: dma_64bit:High DMA is enabled by setting to 1 and disabled by setting to 0.
parmtype: wol:int
parm: wol:Wake-On-Lan is enabled by setting to 1 and disabled by setting to 0.
parmtype: tagging_8021pq:int
parm: tagging_8021pq:802.1pq tagging is enabled by setting to 1 and disabled by setting to 0.
author: Manfred Spraul <manfred@colorfullife.com>
description: Reverse Engineered nForce ethernet driver
license: GPL
vermagic: 2.6.13 SMP K8 gcc-3.3
depends:
alias: pci:v000010DEd000001C3sv*sd*bc*sc*i*
alias: pci:v000010DEd00000066sv*sd*bc*sc*i*
alias: pci:v000010DEd000000D6sv*sd*bc*sc*i*
alias: pci:v000010DEd00000086sv*sd*bc*sc*i*
alias: pci:v000010DEd0000008Csv*sd*bc*sc*i*
alias: pci:v000010DEd000000E6sv*sd*bc*sc*i*
alias: pci:v000010DEd000000DFsv*sd*bc*sc*i*
alias: pci:v000010DEd00000056sv*sd*bc*sc*i*
alias: pci:v000010DEd00000057sv*sd*bc*sc*i*
alias: pci:v000010DEd00000037sv*sd*bc*sc*i*
alias: pci:v000010DEd00000038sv*sd*bc*sc*i*
alias: pci:v000010DEd00000268sv*sd*bc*sc*i*
alias: pci:v000010DEd00000269sv*sd*bc*sc*i*
alias: pci:v000010DEd00000372sv*sd*bc*sc*i*
alias: pci:v000010DEd00000373sv*sd*bc*sc*i*
alias: pci:v000010DEd000003E5sv*sd*bc*sc*i*
alias: pci:v000010DEd000003E6sv*sd*bc*sc*i*
alias: pci:v000010DEd000003EEsv*sd*bc*sc*i*
alias: pci:v000010DEd000003EFsv*sd*bc*sc*i*
alias: pci:v000010DEd00000450sv*sd*bc*sc*i*
alias: pci:v000010DEd00000451sv*sd*bc*sc*i*
alias: pci:v000010DEd00000452sv*sd*bc*sc*i*
alias: pci:v000010DEd00000453sv*sd*bc*sc*i*



00:0a.0 Ethernet controller: nVidia Corporation CK804 Ethernet Controller (rev a3)
Subsystem: Tyan Computer: Unknown device 2865
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e400 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-




ifconfig eth1

eth1 Link encap:Ethernet HWaddr 00:E0:81:59:BE:03
inet addr:10.0.0.10 Bcast:10.255.255.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19 Base address:0x4000

Settings for eth1:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 1
Transceiver: external
Auto-negotiation: on
Supports Wake-on: g
Wake-on: d
Link detected: yes
root@dev3:/usr/src/linux#



ping 10.0.0.10
PING 10.0.0.10 (10.0.0.10) 56(84) bytes of data.
64 bytes from 10.0.0.10: icmp_seq=1 ttl=64 time=0.027 ms

ping 10.0.0.2
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.

--- 10.0.0.2 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms


internal vlan, cant get it to ping out.. any ideas???
chris_king is offline   Reply With Quote