View Single Post
Old 01-23-07, 03:49 AM   #6
Surmoka
Registered User
 
Join Date: Jan 2006
Posts: 11
Default Re: Screen mode validation

Quote:
Originally Posted by AaronP
According to the bug report you attached, 1680x1050 is being rejected because its vertical refresh rate (59.9 Hz) doesn't match the range specified (exactly 75.0 Hz). You'll need to remove the 75 Hz constraint from xorg.conf if you want to run that mode:
Code:
(II) NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
(II) NVIDIA(0): Mode Validation Overrides for FUS S20-1W (DFP-0):
(II) NVIDIA(0):     AllowNon60HzDFPModes
(II) NVIDIA(0): Frequency information for FUS S20-1W (DFP-0):
(II) NVIDIA(0):   HorizSync   : 30.000-82.000 kHz
(II) NVIDIA(0):   VertRefresh : 75.000 Hz
(II) NVIDIA(0):     (HorizSync from EDID)
(II) NVIDIA(0):     (VertRefresh from VertRefresh X Config Option)
(II) NVIDIA(0):
(II) NVIDIA(0): --- Building ModePool for FUS S20-1W (DFP-0) ---
(II) NVIDIA(0):   Validating Mode "1680x1050":
(II) NVIDIA(0):     1680 x 1050 @ 60 Hz
(II) NVIDIA(0):     For use as DFP backend.
(II) NVIDIA(0):     Mode Source: EDID
(II) NVIDIA(0):       Pixel Clock      : 146.25 MHz
(II) NVIDIA(0):       HRes, HSyncStart : 1680, 1784
(II) NVIDIA(0):       HSyncEnd, HTotal : 1960, 2240
(II) NVIDIA(0):       VRes, VSyncStart : 1050, 1053
(II) NVIDIA(0):       VSyncEnd, VTotal : 1059, 1089
(II) NVIDIA(0):       H/V Polarity     : +/+
(WW) NVIDIA(0):     Mode is rejected: VertRefresh (60.0 Hz) out of range
(WW) NVIDIA(0):     (75.000 Hz).
With all due respect, this is a misunderstanding. There are more tries from the driver to validate a suitable 1680x1050 mode and the 75Hz one I specified explicitely gets removed because of the native resolution being allegedly 1440x900 at max.
I don't want to remove the 75Hz constraint since it's the very point of the whole mess from my part: to get it running at 75Hz.
Surmoka is offline   Reply With Quote