View Single Post
Old 02-10-07, 08:17 AM   #3
FOOFAC
Registered User
 
Join Date: Feb 2007
Location: "O Canada!"
Posts: 3
Default Re: So what voltages do I adjust on ASUS P5N32-E SLI?

I have mine orthos stable with a vcore voltage of 1.55v set in the bios which ends up being 1.42v with the vdroop using bios 0202. Everything else can be set to auto except memory voltage which should be set according to your ram specs or more if you OC your ram . 1.2V HT voltage & NB core voltage need to be increased to get over 450 but I'm at 400 so mine are on auto. I hope you have more than stock cooling if you are going to do this. Stock cooler with AS5 did get me stable at 3.2GHz but any higher and the temps were too high. 1333 FSB (QDR) & between 1.3v to 1.4v vcore in the bios with stock cooler should be pretty safe and achievable just make sure to monitor those temps. Remember this is all at your own risk!
__________________
E6600 @ 3.6GHz w/ Tuniq Tower 120
ASUS P5N32-E SLI Nforce 680I
2GB G.SKILL 6400HZ
EVGA GeForce 8800GTX
AuzenTech X-Meridian
2 x Seagate 7200.10 250GB SATA
Western Digital 36GB Raptor SATA
Liteon SHM-165H6S
Silverstone Zeus 750W
Cooler Master 830 Stacker
Mitsubishi Diamond Pro 2070SB
Denon AVR-3300 (HT Receiver)
Klipsch Reference Series RSX-5 (Mains)
Klipsch Reference Series RCX-4 (Center)
Klipsch Reference Series RSX-5 (Surrounds)
Paradigm PW-2200 v.2 (Subwoofer)
Westone UM1 IEMs
Alessandro/Grado MS2i
Rockhopper Audio M (Headphone Amp)
FOOFAC is offline   Reply With Quote