View Single Post
Old 02-14-07, 07:57 PM   #17
rshendershot
Registered User
 
Join Date: Jul 2006
Posts: 10
Default Re: forcedeth problems.

Quote:
Originally Posted by netllama
Which model of motherboard are you using?
How is this system connected to the rest of the network?
Does this problem persist with the newer version of forcedeth that I referenced?
PMBI but this is the most relevent post I have seen to my problem, which seems similar to CK's...

I'll try to figure out the 1.21 update but it's not clear there's a rev for Fedora Core 6. I only have this problem with kernels 2.6.19.x not 2.6.18. This is x86_64 on M2N32-SLI mboard. cat6 cable to a Netgear WNR854T (192.168.1.1). Then again to my PVR. Copying from PVR kills network at about 4-800 MB. that's the gigabit part of my lan

cat5 to a 100/baseT hub and to another FC6 box. Copying files from there is no problem.

re: "ethtool -i eth1" and "route -n" ?

Code:
driver: forcedeth
version: 0.57
firmware-version: 
bus-info: 0000:00:10.0

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth0
Thanks for your help!
-Rick
rshendershot is offline   Reply With Quote