View Single Post
Old 05-08-03, 04:32 AM   #4
luetzel
Registered User
 
Join Date: Apr 2003
Location: Aarhus, Denmark
Posts: 9
Default

To whom it may concern. I played around with some more options in the
XFree86Config-4 file. To summarize the results:

1.) the 1400x1050 panel on my Dell I8200 is recognized properly.
2.) Modelines with a refresh rate of 60Hz (see below) and also 75
get validated and used with the 4191 driver, but fail with the
4363 driver.
3.) The EDID frequencies are not recognized by the new driver. The
log file says that EDID is present but no freqs can be found.

Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "Flat Panel 1400x1050"
DisplaySize 300 230
HorizSync 31.5-90
VertRefresh 59-75
UseModes "LCD"
EndSection

Section "Modes"
Identifier "LCD"
Modeline "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 +HSync +Vsync
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce4 440 Go"
Driver "nvidia"
Option "DPMS"
Option "UseEdidFreqs" "0"
Option "IgnoreEDID" "1"
EndSection

Conclusion: Ther MUST be a bug in the 4363 driver, which leds to the horizontal
lines at 1400x1050 resolution.
luetzel is offline   Reply With Quote