This is an ABIT board these are the voltage regulators as i have PWR1 to 5 as the board is 5 phase 1 & 2 run the hotest @ Vcore 1.5v they are 76C 1.6v they are 96C and seem to crash could be the CPU doesn't like the voltage. The PSU produces pretty much no heat. But increasing the CPU voltage greatly increases the phase power regulators heat so need either a CPU fan with downward airflow or get a couple of 40mm fans for the nForce 680i board as it does get abit warmer then what i like. But don't really think it will cool the PWR's
Was thinking of the GigaByte 3D Watercooler as it has a PWR fan on the waterblock which is cool. Too bad the high end Dangfer dan etc don't